Hide Table of Contents


Menu: Electrical project > Configurations > Project... > Graphic

Dockable panel > Contextual menu of the Project: Configurations > Project... > Graphic

Connection dots

Symbol: Select in the list, the value (Never, Always or only when the symbol is connected to a wire) you want to display the dots placed where a wire connects to a symbol. You can also set the size and color of the dots.

Wire: The Display checkbox lets you display or not the dots placed on wire intersections where two wires form a connection. You can also set the size and color of the dots.

Line styles

Location: Defines the line type and color of the location outline.

Function: Defines the line type and color of the function outline.

Terminal strips: Defines the line type and color of the axis lines used when placing multiple terminals in a schematic.

Cable core: Defines the line type and color used in drawings to represent your cable cores.

Bridges: Sets the display parameters (color and line style) for the bridges in schematic pages (wire/bridge). 

Equipotential conflicts: An equipotential conflict occurs when you connect two different equipotentials (equipotentials with a different number). This checkbox updates the control. You can also choose a line type and color for the line symbol.

Cable label: Defines the type and color of the line joining the cable to the cable label.

Nodal indicator

Automatically show nodal indicator: Check the box if you want to activate the nodal indicator. An oblique line materializes the cabling order between several components.

Oblique line size: Enter the line size materializing the nodal indicator. The value must be consistent with the distance between two wires.

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Graphic
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS Electrical 2022 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.