Cross references configuration
|
Menu: Electrical
project > Configurations > Cross references ... > Properties
Menu: Electrical Project >
Configurations > Cross references ... > New
Dockable panel > Contextual menu of the electrical project:
Configurations > Cross references
... > Properties
Dockable panel > Contextual menu of the electrical project:
Configurations > Cross references
... > New
Contextual menu of a symbol: Edit
cross references style... |
Groups together all the parameters required to draw the thumbnails representing
the cross references.
General
This tab allows you to name the configuration file and to give it a
description in any of the languages supported by the software.
Style
General
Lets you allocate a color to the various type of circuit (used, available,
whether contained or not in the manufacturer part). Clicking in the column
where the number of the color is displayed opens the palette of available
colors.
Visible circuit Type: Hides
or shows the circuits placed in reserve (not used in the scheme).
Default representation: Used
to select Table mode, Parent
in Line mode or None
to be used on all the symbols for the electrical project when the cross
references levels have been set to Use
default configuration.
Always use default representation:
Allows the default configuration to be used on all symbols for the electrical
project whatever their cross references level setting.
Text between cross references:
Enter the text that separates two cross references texts.
Parent in table (e.g. a coil)
General
Distance between columns: Indicates
the distance between two columns of thumbnails.
Distance between elements: Indicates
the distance between two thumbnails.
Maximum height: Indicates the
maximum height of the column. If the value is exceeded, a second column
is created.
Use title block offset: If this
option is activated, the cross references thumbnails are drawn in the
area defined by the title block parameters, the Distance
to symbol parameter is disabled. Otherwise, the cross references
thumbnails are located near the symbol (like Parent
in line) and you must enter a value in the Distance
to symbol parameter to define the distance between the symbol and
the cross references thumbnails.
Distance to symbol: Indicates
the distance between the symbol insertion point and the cross references
thumbnails.
Mark:
Parameters of the text using the component mark displayed above the set
of thumbnails.
Terminal numbers: Parameters
of the material terminal numbers.
Symbol cross references: Parameters
of the texts giving the drawing number and column number where the symbol
is located.
The X and Y position of the cross references block in the drawing is
configured in the Title block
properties.
Parent in line (e.g. a circuit
breaker)
General
Space between lines: Indicates
the distance between two lines of thumbnails.
Distance between elements: Indicates
the distance between two thumbnails.
Maximum width: Indicates the
maximum width of the line of thumbnails. If the value is exceeded, a second
line is created.
Use title block offset: This
option is only available if the electrical project use Imperial units.
If this option is activated, the cross references thumbnails are drawn
in the area defined by the title block parameters, the Distance to symbol
parameter is disable. Otherwise, the cross references thumbnails are located
near the symbol (like Parent in line) and you must enter a value in the
Distance to symbol parameter to define the distance between the symbol
and the cross references thumbnails.
Distance to symbol: Indicates
the distance between the symbol insertion point and the cross references
thumbnails.
Terminal numbers: Parameters
of the material terminal numbers.
Symbol cross references: Parameters
of the texts giving the drawing number and column number where the symbol
is located.
Symbols
Lets you associate a cross references thumbnail with each type of circuit.
These thumbnails are symbols, they have connection points and attributes
allowing to propagate the numbers of the material terminals.