Managing Title blocks
Each drawing type has an associated title block (electrical
project Configuration). Nevertheless, you can modify the title block
in existing drawings.
The title block associated with the drawing can also be changed in the
properties of the drawing.
|
Contextual menu of a drawing: Title
block |
|
Update: If the definition of the title block has
been modified, this command is used to update the title block
for the drawing. It can be used in a multiple selection. |
|
Replace: Used to associate a different title block
with the drawing that it is associated with in the electrical
project configuration. The Title
block selector opens, allowing you to select a new title
block. After the replacement, SOLIDWORKS Electrical
asks you if you want to apply this title block to all drawings
using the original title block. You can also, update the electrical
project configuration with this new title block. |
|
Remove: Allows you
to delete the title block inserted in the drawing. |
|
Open: Opens the title block modification interface.
If the title block has been modified and you want these modifications
to be applied to the existing drawings, use the Update
command. |
|
Add to library: Adds the title block on the drawing
to the library. |