![](oca1471453786291.image) |
Plane, Axis or Coordinate System |
Select a reference plane, an axis, or a coordinate system to list stress. Used for directional components only. |
|
Nodes |
Lists nodal stresses |
|
Element's center |
Lists element stresses
or strains at element center. |
|
Element's nodes |
Available only if Range is selected. Lists the normal and shear stresses at the nodes of each element defined in Range. |
![replace_face_surface.png](ckn1537966463959.image) |
Shell Face |
Available for shell and mixed mesh models only.
- Top (total stresses or strains at the top face)
- Bottom (total stresses or strains at the bottom face)
- Membrane (membrane stress or strain component)
- Bending (bending stress or strain component)
|
![](udh1465587993691.image) |
Extremes |
Select this option to search for extreme values.
|
![](gcb1450461076000.image) |
Criterion |
Sets the criterion for extreme values of results. Available list options are:- Absolute Max
- Algebraic Max
- Algebraic Min
|
|
Sort by value |
Activates the sorting of the list.
|
|
List all values within |
Sets the range of values to be listed. The default is to list values within 5% tolerance of the extreme value.
|
![](ucu1465827970187.image) |
Range |
Select to specify the desired range of nodes/elements to be searched. Use this option to list values sequentially with node/element numbers. Enter the lowest and the highest node/element numbers.
|