Hide Table of Contents

Attaching PDF Files as Underlays

Use the AttachPDF command to attach pages of a PDF document to a drawing.

The command links the specified file as a reference to the current drawing.

To attach PDF files as Underlays:

  1. Click Insert > PDF Underlay (or type AttachPDF).
  2. In the dialog box, select a PDF file to attach and click Open.
  3. In the Attach Reference: PDF Underlay dialog box, Name displays the name of the file you selected, or you can select a previously attached PDF file. Click Browse to select a different PDF file.
  4. In File information, specify the Path type:
    • Full: Shows the complete path to the PDF file.
    • None: Shows only the PDF file name.
    • Relative: Shows the relative path to the PDF file. If the drawing and PDF file are in the same folder, only the file name of the image is displayed.
  5. If the PDF file contains multiple pages, select the pages of the PDF file to insert.
  6. Under Insertion point, for X, Y, and Z, type coordinate values, or select Specify later to specify the insertion point on screen after closing the dialog box.
  7. Under Rotate, for Angle, type a value or select Specify later to set the rotation angle in the graphics area during insertion.
  8. Under Scale, type a scale factor, or select Specify later to specify the scaling on screen after closing the dialog box.
  9. Click OK.

Access

Command: AttachPDF

Menu: Insert > PDF Underlay



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Attaching PDF Files as Underlays
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: 2023 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.