Complex Corner PropertyManager

To open the Complex Corner PropertyManager:

  1. Open a model that includes three or more intersecting members.
  2. In the FeatureManager design tree, expand Corner Management .
  3. Right-click Complex Corner Group and select Edit Feature.

In the graphics area, each blue handle on the model represents a corner group. When you select a blue handle, the corner group highlights in the PropertyManager.

Corners

Lists corners or groups of similar corners.

Similar Corners

Group Similar Corners lets you group similar corners and apply a corner treatment to the group. You can add or remove corners from a group.
Similar Corners is available when you select a corner from the list.

Corner Treatment

  Trim tool member Defines the tool body for all other members.Conforms the intersecting member to the shape of adjacent faces by adding or removing material.
  Moves the body member Up to Trim tool member or Down to Planar Trim.
Body Trim Lists all the bodies to be trimmed.
Planar Trim Type Cuts the intersecting member with a plane.
First Contact planar trim Default Planar trim option. Trims planar trim member when it first comes into contact with adjacent faces.
Full Contact planar trim Planar trim option. Trims the planar trim member and takes the shape of its adjacent faces when it touches them.
Gap Adds a gap between members at specific corners.
  Ignore Corner Treatment Excludes the corner treatment.
  Allow Extension Select to extend or trim structural members. Clear to allow only trimming. When using this option, check the preview carefully to ensure that the results are correct.