End Treatment PropertyManager

To open the End Treatment PropertyManager:

In a drawing document, click End Treatment Tool_End_Treatment_Annotation.gif (Annotation toolbar) or Insert > Annotations > End Treatment.

Specify the following properties when you insert an end treatment weld bead in a drawing.

Parameters

PM_ansi_type.gif ANSI type Creates an end treatment in the ANSI standard.
PM_iso_type.gif ISO type Creates an end treatment in the ISO standard.
PM_distance1.gif Bead leg length 1 (ANSI type only) Sets the length of the end treatment for the first edge.
Bead leg length 2 (ANSI type only) If Equal leg length is cleared, sets the length of the end treatment for the second edge.
PM_bead_throat_thickness.gif Bead throat thickness (ISO Type only) Defines the end treatment by setting the throat thickness.
PM_bead_leg_length.gif Bead leg length (ISO type only) Defines the end treatment by setting the leg length.
select_edges.png Edges Displays the weld bead or two edges that create the boundary for the end treatment. You must select two adjacent edges. The symbol is placed at the intersection of the edges.
  Display dimensions Shows the Bead leg length or Bead throat thickness values in the graphics area. Changes to the dimensions change the symbol.
end_treatment_dimensions.gif
  Use solid fill Displays the end treatment in a solid color. When cleared, the symbol gives a line representation.
end_treatment_solid_fill_selected.gif end_treatment_solid_fill_cleared.gif
Selected Cleared

Layer PM_Layer.gif

Applies the weld bead to the specified drawing layer.