SOLIDWORKS Toolbox With SOLIDWORKS Toolbox, you can add standard hardware components to an assembly. To enable SOLIDWORKS Toolbox: Click Tools > Add-Ins. In the dialog box, select SOLIDWORKS Toolbox Library and SOLIDWORKS Toolbox Utilities, then click OK. Start this lesson. Contents Toolbox Basic Lesson Creating a Part First, you create a part to use as a component in an assembly. Creating an Assembly Next, you create the assembly and add the SOLIDWORKS Toolbox hardware components. Adding a Hex Bolt Now you add a standard hex bolt from the SOLIDWORKS Toolbox library. Completing the Hex Bolt Adding a Second Hex Bolt Next, you add a second hex bolt to the assembly. The Insert Components PropertyManager is open, allowing you to add more instances of the same Toolbox component. Adding Nuts to the Assembly Add other fasteners to the assembly. Changing the Length of the Bolts Now that you have added the nuts, you can see that the bolts are not long enough. You can edit the definition of the bolts to change their length. Parent topicBasic Techniques Fillet Features Revolve and Sweep Features Pattern Features Loft Features Sheet Metal Customization Overview Design Tables