| Name | Description |
![Method](dotnetimages/Method.gif) | AddTemporaryEntity | Inserts the specified temporary entity in the drawing. |
![Method](dotnetimages/Method.gif) | Align3DEntities | Aligns the specified entities in 3D space. |
![Method](dotnetimages/Method.gif) | AlignEntities1Point | Aligns the specified entities, without rotating them, using one pair of points. |
![Method](dotnetimages/Method.gif) | AlignEntities2Point | Aligns the specified entities, rotating them based on the current coordinate system, using two pairs of points. |
![Method](dotnetimages/Method.gif) | AlignEntities3Point | Aligns the specified entities using three pairs of points. |
![Method](dotnetimages/Method.gif) | AttachLinkToArea | Attaches the specified hyperlink to the specified rectangular area. |
![Method](dotnetimages/Method.gif) | BringAboveEntities | Moves the specified entities above the specified reference entities. |
![Method](dotnetimages/Method.gif) | BringToFrontEntities | Moves the specified entities to the top of the drawing order. |
![Method](dotnetimages/Method.gif) | ChamferEntities | Connects two sketch entities that meet in a beveled corner. |
![Method](dotnetimages/Method.gif) | ChamferPolyLine | Chamfers the specified 2D PolyLine. |
![Method](dotnetimages/Method.gif) | CopyEntities | Obsolete. Superseded by ISketchManager::CopyEntities2. |
![Method](dotnetimages/Method.gif) | CopyEntities2 | Copies the specified entities, places the copies at the specified relative location, and returns the copies. |
![Method](dotnetimages/Method.gif) | CrossSectionEntitiesBy3Points | Cross sections the specified solid entities using the plane described by the specified points. |
![Method](dotnetimages/Method.gif) | CrossSectionEntitiesByEntity | Cross sections the specified solid entities using the specified 2D entities. |
![Method](dotnetimages/Method.gif) | CrossSectionEntitiesByView | Cross sections the specified solid entities at the specified point on the active view plane. |
![Method](dotnetimages/Method.gif) | CrossSectionEntitiesByXY | Cross sections the specified solid entities at the specified point on the XY plane. |
![Method](dotnetimages/Method.gif) | CrossSectionEntitiesByYZ | Cross sections the specified solid entities at the specified point on the YZ plane. |
![Method](dotnetimages/Method.gif) | CrossSectionEntitiesByZAxis | Cross sections the specified solid entities at the specified point on the section plane that is normal to the specified Z-axis. |
![Method](dotnetimages/Method.gif) | CrossSectionEntitiesByZX | Cross sections the specified solid entities at the specified point on the ZX plane. |
![Method](dotnetimages/Method.gif) | DetachExternalReference | Detaches the specified external reference from the drawing. |
![Method](dotnetimages/Method.gif) | DetachReferenceImage | Detaches the specified Referenced image from the drawing. |
![Method](dotnetimages/Method.gif) | ExplodeEntities | Explodes a complex object comprised of the specified entities. |
![Method](dotnetimages/Method.gif) | ExtendEntities | Extends the specified sketch entities. |
![Method](dotnetimages/Method.gif) | ExtrudeEntitiesToSolidByHeight | Extrudes the specified entities into a solid with the specified height and the specified angle of taper. |
![Method](dotnetimages/Method.gif) | ExtrudeEntitiesToSolidByPath | Extrudes the specified entities into a solid using the specified path entity and the specified angle of taper. |
![Method](dotnetimages/Method.gif) | ExtrudeEntitiesToSurfaceByHeight | Extrudes the specified entities into a surface with the specified height and the specified angle of taper. |
![Method](dotnetimages/Method.gif) | ExtrudeEntitiesToSurfaceByPath | Extrudes the specified entities into a surface using the specified path entity, the specified height, and the specified angle of taper. |
![Method](dotnetimages/Method.gif) | FilletEntities | Connects two entities with a fillet arc that is tangent to both entities. |
![Method](dotnetimages/Method.gif) | FilletPolyLine | Fillets the specified 2D PolyLine. |
![Method](dotnetimages/Method.gif) | FlatShotByExportToFile | Saves a 2D flattened representation of the current view's 3D solid objects and Regions to an external drawing file. |
![Method](dotnetimages/Method.gif) | FlatShotByInsertAsBlock | Inserts a 2D flattened representation of the current view's 3D solid objects and Regions to the specified Block in the graphics area. |
![Method](dotnetimages/Method.gif) | FlatShotByReplaceExistingBlock | Replaces an existing Block in the drawing with a new Block containing the 2D flattened representation of the current view's 3D solid objects and Regions. |
![Method](dotnetimages/Method.gif) | GetBoundingBox | Gets the bounding box enclosing the sketch entity. |
![Method](dotnetimages/Method.gif) | GetEntities | Get the specified entities and their types. |
![Method](dotnetimages/Method.gif) | GetObjectLayer | Gets the name of the Layer where the specified sketch entity resides. |
![Method](dotnetimages/Method.gif) | InsertAlignedDimension | Inserts an aligned linear Dimension. |
![Method](dotnetimages/Method.gif) | InsertAngularDimension2Line | Inserts an angular Dimension formed by two lines. |
![Method](dotnetimages/Method.gif) | InsertAngularDimension3Point | Inserts an angular Dimension formed by three points. |
![Method](dotnetimages/Method.gif) | InsertAngularDimensionArc | Inserts an angular Dimension formed by the two end points of an Arc. |
![Method](dotnetimages/Method.gif) | InsertArc | Constructs an Arc. |
![Method](dotnetimages/Method.gif) | InsertArcBy3Points | Constructs an Arc using the specified three points. |
![Method](dotnetimages/Method.gif) | InsertArcByCenter2Points | Obsolete. Superseded by ISketchManager::InsertArcByCenter2Points. |
![Method](dotnetimages/Method.gif) | InsertArcByCenter2Points2 | Constructs an Arc using the specified center, start, and end points. |
![Method](dotnetimages/Method.gif) | InsertArcLengthDimension | Gets access to an arc length Dimension. |
![Method](dotnetimages/Method.gif) | InsertArcLengthDimensionPartial | Gets access to a partial arc length Dimension. |
![Method](dotnetimages/Method.gif) | InsertAttributeDefinition | Obsolete. Superseded by ISketchManager::InsertAttributeDefinition2. |
![Method](dotnetimages/Method.gif) | InsertAttributeDefinition2 | Creates a BlockAttribute definition. |
![Method](dotnetimages/Method.gif) | InsertBlock | Obsolete. Superseded by ISketchManager::InsertBlock2. |
![Method](dotnetimages/Method.gif) | InsertBlock2 | Inserts a Block instance. |
![Method](dotnetimages/Method.gif) | InsertCircle | Constructs a Circle. |
![Method](dotnetimages/Method.gif) | InsertCircleBy3Points | Constructs a Circle using the specified three points. |
![Method](dotnetimages/Method.gif) | InsertCircleByDiameter | Constructs a Circle using the specified center point and diameter. |
![Method](dotnetimages/Method.gif) | InsertCurvedText | Inserts the specified text along the curve of the specified Arc. |
![Method](dotnetimages/Method.gif) | InsertDgn | Inserts a DGN image. |
![Method](dotnetimages/Method.gif) | InsertDiameterDimensionArc | Inserts a diameter dimension for an Arc. |
![Method](dotnetimages/Method.gif) | InsertDiameterDimensionCircle | Inserts a diameter dimension for a Circle. |
![Method](dotnetimages/Method.gif) | InsertEllipseArcDistanceToOtherAxis | Constructs an elliptical Arc using the specified axes end points, radius of the perpendicular axis, and start and end angles. |
![Method](dotnetimages/Method.gif) | InsertEllipseArcRotation | Constructs an elliptical Arc using the specified axes end points, angle of rotation, and start and end angles. |
![Method](dotnetimages/Method.gif) | InsertEllipseDistanceToOtherAxis | Constructs an Ellipse using the specified axes end points and the radius of the perpendicular axis. |
![Method](dotnetimages/Method.gif) | InsertEllipseRotation | Constructs an Ellipse using the specified axes end points and the angle of rotation. |
![Method](dotnetimages/Method.gif) | InsertEmbeddedObjectFromFile | Adds an embedded object to the document based on the specified file. |
![Method](dotnetimages/Method.gif) | InsertExternalReference | Inserts an external reference to a Block instance. |
![Method](dotnetimages/Method.gif) | InsertFace | Inserts a Face. |
![Method](dotnetimages/Method.gif) | InsertHatchByBoundary | Inserts a Hatch with the specified pattern, scale, angle, and boundary loop. |
![Method](dotnetimages/Method.gif) | InsertHatchByEntities | Inserts a Hatch with the specified pattern, scale, angle, and boundary defined by the specified entities. |
![Method](dotnetimages/Method.gif) | InsertHatchByInternalPoints | Inserts a Hatch with the specified pattern, scale, and angle in the enclosed areas defined by the specified internal points. |
![Method](dotnetimages/Method.gif) | InsertInfiniteLine | Constructs an InfiniteLine. |
![Method](dotnetimages/Method.gif) | InsertJoggedDimensionArc | Inserts a jogged Dimension for an Arc. |
![Method](dotnetimages/Method.gif) | InsertJoggedDimensionCircle | Inserts a jogged Dimension for an Circle. |
![Method](dotnetimages/Method.gif) | InsertLeader | Inserts a Leader. |
![Method](dotnetimages/Method.gif) | InsertLine | Constructs a Line. |
![Method](dotnetimages/Method.gif) | InsertLinearDimension | Inserts a linear Dimension. |
![Method](dotnetimages/Method.gif) | InsertNote | Inserts a Note. |
![Method](dotnetimages/Method.gif) | InsertNoteWithParameters | Inserts and formats the Note as specified. |
![Method](dotnetimages/Method.gif) | InsertOrdinateDimension | Inserts an ordinate Dimension. |
![Method](dotnetimages/Method.gif) | InsertPdf | Inserts page images from a PDF. |
![Method](dotnetimages/Method.gif) | InsertPicture | Inserts a raster Referenced image. |
![Method](dotnetimages/Method.gif) | InsertPoint | Inserts a point. |
![Method](dotnetimages/Method.gif) | InsertPolyFaceMesh | Inserts a polygon face mesh. |
![Method](dotnetimages/Method.gif) | InsertPolygonMesh | Inserts a PolygonMesh with the specified MxN vertices at the specified coordinates. |
![Method](dotnetimages/Method.gif) | InsertPolyline2D | Constructs a 2D PolyLine. |
![Method](dotnetimages/Method.gif) | InsertPolyline3D | Constructs a 3D PolyLine. |
![Method](dotnetimages/Method.gif) | InsertRadialDimensionArc | Inserts a radius Dimension for an Arc. |
![Method](dotnetimages/Method.gif) | InsertRadialDimensionCircle | Inserts a radius Dimension for a Circle. |
![Method](dotnetimages/Method.gif) | InsertRay | Inserts a Ray. |
![Method](dotnetimages/Method.gif) | InsertRegion | Constructs a Region for each selected entity. |
![Method](dotnetimages/Method.gif) | InsertRichLine | Constructs a RichLine. |
![Method](dotnetimages/Method.gif) | InsertRotatedDimension | Inserts a rotated Dimension. |
![Method](dotnetimages/Method.gif) | InsertShape | Inserts a shape. |
![Method](dotnetimages/Method.gif) | InsertSimpleNote | Inserts a SimpleNote. |
![Method](dotnetimages/Method.gif) | InsertSolid | Inserts a 2D Solid, which are solid filled planes that have straight line borders, at the specified location. |
![Method](dotnetimages/Method.gif) | InsertSpline | Constructs a Spline. |
![Method](dotnetimages/Method.gif) | InsertTable | Inserts a Table. |
![Method](dotnetimages/Method.gif) | InsertTolerance | Inserts a geometric Tolerance. |
![Method](dotnetimages/Method.gif) | InsertTrace | Inserts a Trace, which is a 2D solid Line. |
![Method](dotnetimages/Method.gif) | IntersectEntities | Intersects the specified regions or 3D solids to create new regions or 3D solids. |
![Method](dotnetimages/Method.gif) | IsObjectErased | Gets whether the specified sketch entity is erased. |
![Method](dotnetimages/Method.gif) | IsObjectVisible | Gets whether the specified sketch entity is visible. |
![Method](dotnetimages/Method.gif) | LoftEntitiesToSolidByGuides | Creates a new Loft using the specified closed entities, profile guide lines, draft angles, and draft curvatures. |
![Method](dotnetimages/Method.gif) | LoftEntitiesToSolidByPath | Creates a new Loft using the specified closed entities, path curves, draft angles, and draft curvatures. |
![Method](dotnetimages/Method.gif) | LoftEntitiesToSurfaceByGuides | Creates a new lofted surface using the specified entities, profile guide lines, draft angles, and draft curvatures. |
![Method](dotnetimages/Method.gif) | LoftEntitiesToSurfaceByPath | Creates a new lofted surface using the specified entities, path curves, draft angles, and draft curvatures. |
![Method](dotnetimages/Method.gif) | Mirror3DEntities | Creates a mirror image of the specified entities in a 3D plane around a 3D axis. |
![Method](dotnetimages/Method.gif) | MirrorEntities | Mirrors the specified entities onto the opposite side of the specified mirror line. |
![Method](dotnetimages/Method.gif) | MoveEntities | Moves the specified sketch entities to the specified relative location. |
![Method](dotnetimages/Method.gif) | OffsetEntityByDistance | Copies the specified entity to a location at the specified distance. |
![Method](dotnetimages/Method.gif) | OffsetEntityByThroughPoint | Copies the specified entity through the specified point. |
![Method](dotnetimages/Method.gif) | Pattern3DCircular | Creates a pattern of the specified entities in 3D space in a circular alignment about a rotation axis. |
![Method](dotnetimages/Method.gif) | Pattern3DLinear | Creates a pattern of the specified entities in 3D space in a matrix of rows, columns, and levels. |
![Method](dotnetimages/Method.gif) | PatternCircular | Creates a circular pattern of the specified entities. |
![Method](dotnetimages/Method.gif) | PatternLinear | Creates a linear pattern of the specified entities |
![Method](dotnetimages/Method.gif) | PolysolidByCoordinates | Creates a PolySolid using the specified vertices, height, and width. |
![Method](dotnetimages/Method.gif) | PolysolidByEntities | Creates a PolySolid using the specified 2D entities, height, and width. |
![Method](dotnetimages/Method.gif) | PushPullEntities | Extrudes selected 2D open entities into surfaces or selected 2D closed entities into 3D solids. |
![Method](dotnetimages/Method.gif) | RevolveEntitiesToSolidByAxis | Revolves the specified entities into a solid using the specified axis and angle of revolution. |
![Method](dotnetimages/Method.gif) | RevolveEntitiesToSolidByObject | Revolves the specified entities into a solid using the specified axis and angle of revolution. |
![Method](dotnetimages/Method.gif) | RevolveEntitiesToSolidByXAxis | Revolves the specified entities into a solid using the specified X-axis and angle of revolution. |
![Method](dotnetimages/Method.gif) | RevolveEntitiesToSurfaceByAxis | Revolves the specified entities into a surface using the specified axis and angle of revolution. |
![Method](dotnetimages/Method.gif) | RevolveEntitiesToSurfaceByObject | Revolves the specified entities into a surface using the specified axis and angle of revolution. |
![Method](dotnetimages/Method.gif) | RevolveEntitiesToSurfaceByXAxis | Revolves the specified entities into a surface using the specified X-axis and angle of revolution. |
![Method](dotnetimages/Method.gif) | Rotate3DEntities | Rotates the specified entities in 3D space. |
![Method](dotnetimages/Method.gif) | RotateEntities | Rotates the specified entities. |
![Method](dotnetimages/Method.gif) | ScaleEntities | Scales the specified entities while keeping their proportions the same. |
![Method](dotnetimages/Method.gif) | SendToBackEntities | Moves the specified entities to the bottom of the drawing order. |
![Method](dotnetimages/Method.gif) | SendToUnderEntities | Moves the specified entities under the specified reference entities. |
![Method](dotnetimages/Method.gif) | SetObjectErased | Sets whether the specified sketch entity is erased. |
![Method](dotnetimages/Method.gif) | SetObjectLayer | Sets the specified Layer of the specified sketch entity. |
![Method](dotnetimages/Method.gif) | SetObjectVisible | Sets whether the specified sketch entity is visible. |
![Method](dotnetimages/Method.gif) | SliceEntitiesBy3Points | Slices the specified 3D entities using the plane defined by the three specified points. |
![Method](dotnetimages/Method.gif) | SliceEntitiesByPlanarEntity | Slices the specified 3D entities using the specified planar entity. |
![Method](dotnetimages/Method.gif) | SliceEntitiesBySurface | Slices the specified 3D entities using the specified surface entity. |
![Method](dotnetimages/Method.gif) | SliceEntitiesByView | Slices the specified 3D entities using the active view plane that contains the specified point. |
![Method](dotnetimages/Method.gif) | SliceEntitiesByXY | Slices the specified 3D entities using the XY plane that contains the specified point. |
![Method](dotnetimages/Method.gif) | SliceEntitiesByYZ | Slices the specified 3D entities using the YZ plane that contains the specified point. |
![Method](dotnetimages/Method.gif) | SliceEntitiesByZAxis | Slices the specified 3D entities using the section plane that contains the specified point and whose normal contain the specified point on the Z-axis. |
![Method](dotnetimages/Method.gif) | SliceEntitiesByZX | Slices the specified 3D entities using the ZX plane that contains the specified point. |
![Method](dotnetimages/Method.gif) | StartUndoRecord | Starts the undo recording of a set of sketch operations. |
![Method](dotnetimages/Method.gif) | StopUndoRecord | Stops the undo recording of a set of sketch operations. |
![Method](dotnetimages/Method.gif) | StretchEntities | Changes the relative positions of a sketch entity's nodes, retaining their relations to other nodes in the entity. |
![Method](dotnetimages/Method.gif) | SubtractEntities | Subtracts the specified Regions or 3D solids from other specified Regions or 3D solids to create a composite Region or a 3D solid. |
![Method](dotnetimages/Method.gif) | SweepEntitiesToSolid | Creates a swept solid using the specified 2D entities, closed sweep path, base point, scale, banking, and twist angle. |
![Method](dotnetimages/Method.gif) | SweepEntitiesToSurface | Creates a swept surface using the specified 2D entities, open sweep path, base point, scale, banking, and twist angle. |
![Method](dotnetimages/Method.gif) | TrimEntities | Trims the specified sketch entities. |
![Method](dotnetimages/Method.gif) | UnionEntities | Unites the specified Regions or 3D solids to create a composite Region or a 3D solid. |