Attaching Drawings as References
You can attach an external drawing to the current drawing. This creates a link between the external drawing and the current drawing.
The software periodically checks whether the attached referenced drawings have changed since the last time the referenced drawings were loaded.
When you open a drawing that has one or more externally referenced files, the External Reference icon () appears in the status bar. Clicking the External Reference icon displays the References palette.
To attach drawings as References:
- Click Insert > Reference Drawing (or type AttachDrawing).
- In the dialog box, select the drawings to attach, and click Open.
Note: Use Shift + Arrow or Ctrl + Click keys or for multiple selection.
- In the Attach Reference: Drawing dialog box, Name displays the name of the first file from your selection, or you can select a previously attached drawing. Click Browse to select a different drawing.
- Specify File information:
- Path type: Specifies how to display the path to the drawing.
- Full: Shows the complete path to the drawing.
- None: Shows only the file name.
- Relative: Shows the relative path to the drawing. If both drawings are in the same folder, only the file name of the drawing is displayed.
- Reference type: Indicates whether to include the Referenced drawing when the current drawing is attached to another drawing.
- Attachment: Includes the Referenced drawing.
- Overlay: Does not include the Referenced drawing.
- Specify the Insertion point:
- Specify later: Lets you specify the insertion point in the graphics area after the dialog box closes.
- X, Y, Z: Specifies the X, Y, and Z coordinates for the drawing location.
- Specify the Scale:
- Specify later: Lets you specify the scale in the graphics area after the dialog box closes.
- X, Y, Z: Specifies the X, Y, and Z coordinates of each axis independently.
- Lock aspect ratio: Lets you enter the X axis and fixes the other coordinates.
- Specify the Rotation:
- Specify later: Lets you specify the angle in the graphics area after the dialog box closes.
- Angle: Sets the angle of rotation for the drawing.
- Verify Block units information (read-only):
- Units: Shows the unit system of the specified drawing.
- Scale: Shows the scale factor of the specified drawing.
- Click OK.
- The dialog box appears for every drawing from the selection. Repeat steps 3 through 9 for every drawing.
Command: AttachDrawing
Menu: Insert > Reference Drawing
Ribbon: Insert > Reference > Draw > Attach > Drawing
Tool Palettes: Draw > Attach Drawing