Ribbon
cable clips
restrain the cable
at selected points along the
route to help you
define the path of the cable.
Ribbon cable clips
contain:
- An
axis
to
define the centerline of the route as it passes through the clip.
- A
coordinate
system
to define the alignment of the ribbon cable as it passes through the clip.
To
access clips
provided
with the software, on the
Design
Library tab of the Task Pane, browse to routing\electrical\ribbon cable.
You can use virtual
clips to help you control the path of the cable without
adding
hardware to the assembly. The virtual clip does not require any solid geometry. You
can exclude the virtual clip from the bill of materials.