Specify the following properties when you add an area hatch or fill pattern in a drawing.
To open the Area Hatch/Fill PropertyManager:
- In a drawing document, select a model face, a segment of a closed sketch
profile, or a region bounded by a combination of model edges and sketch
entities.
Only planar faces are
allowed.
- Click Area Hatch/Fill
(Annotation toolbar), or click
.
Properties
Hatch |
Applies a hatch pattern to the region. When selected, you can
set the Hatch Pattern,
Hatch Pattern Scale
, and Hatch Pattern Angle
. |
Solid |
Applies a black fill to the region.
|
To change the fill color, select the fill in the graphics area and
click Line Color
 (Line Format
toolbar). You cannot change the color of an area hatch in a
section view.
|
None |
Removes the area hatch or fill from the region.
|
Area to Hatch
Region |
Applies the area hatch or fill to a closed region bounded by
model edges or sketch entities. |
 |
Boundary |
Applies the area hatch or fill to a combination of model edges and sketch entities that you select for Selected boundary or face. |
 |
Layer

Applies the area hatch or fill to the specified drawing layer.