![](cvu1450452582892.image) |
Triangular Profile |
Click to create a triangular gusset, then set values for Profile Distance1 and Profile Distance2.
![weldments_gussets_triangular01.gif](szb1450452586208.image)
|
![PM_profile_polygonal.gif](qmw1450452583435.image) |
Polygonal Profile |
Click to create a polygonal gusset, then set values for Profile Distance1, Profile Distance2, and Profile Distance3. Then select one of the following:
d4
|
Set a value for Profile Distance4.
|
a
|
Set a value for Profile Angle.
|
![weldments_gussets_polygonal01.gif](emm1450452586760.image)
|
![PM_profile_chamfered_gusset.gif](tco1450452584035.image) |
Chamfer |
Click to create a chamfer to allow room for a weld bead under the gusset. Set Chamfer Distance5, then select one of the following:
d6
|
Set a value for Chamfer Distance6.
|
a2
|
Set a value for Chamfer Angle.
|
|
|
Thickness |
Select where to apply gusset thickness:- Inner Side
![weldments_gussets_inner.gif](sek1450452587345.image)
- Both Sides
![weldments_gussets_both.gif](vbx1450452587879.image)
- Outer Side
![weldments_gussets_outer.gif](uno1450452588389.image)
(For all of the above images, Location is set to Profile Locates at Mid Point.)
|
![PM_thickness.gif](ifi1482517393557.image) |
Gusset Thickness |
Set a value. |