Hole Series (First Part) PropertyManager

The First Part is the part whose face you selected. Enter parameters for the Hole Series.

To open the Hole Series (First Part) PropertyManager:

Click Hole Series (Features toolbar) or Insert > Assembly Feature > Hole > Hole Series.

Hole Specification

The Hole Specification options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options.

Countersink

Counterbore

Hole
PM_HoleWiz_csink_slot.png

Countersink Slot

 PM_HoleWiz_cbore_slot.png

Counterbore Slot

 PM_HoleWiz_slot.png

Slot
Standard Specifies the hole standard. For example, select ANSI Metric or JIS.
Type Specifies drill sizes, tap drills, dowel holes, or screw clearance. For example, select All Drill Sizes or Screw Clearances.
Size Specifies the fastener size.
Show decimal values For straight holes or slots, displays decimal hole size values for all, letter, number, or fractional drill sizes.
Fit Specifies the fastener fit: Close, Normal, or Loose.
Options The Options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options such as:
  • Head clearance
  • Under head and near side diameter and angle

Custom Sizing

Sizing options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options such as diameter, depth, and angle.
You can override the value in the boxes. To revert to the default values, click Restore Default Values. The background color of the boxes is white for the default value, and yellow for the override value.