End Condition Types

The Type determines how far the feature extends.

Blind Extends the feature from the sketch plane for a specified distance.
Through All Extends the feature from the sketch plane through all existing geometry.
Through All - Both Extends the feature from the sketch plane through all existing geometry for Direction 1 and Direction 2.
Up to Next Extends the feature from the sketch plane to the next surface that intercepts the entire profile. The intercepting surface must be on the same part.
Up to Vertex Extends the feature from the sketch plane to a plane that is parallel to the sketch plane and passing through the specified vertex. Select a vertex.
Up to Surface Extends the feature from the sketch plane to the selected surface.
Offset from Surface Extends the feature from the sketch plane to a specified distance from the selected surface. Select a face to specify the surface, then specify an offset distance.
Up to Body Extends the feature up to the selected body. Use this option with assemblies, mold parts, or multibody parts. Select a solid or surface body up to which the feature extends.
Mid Plane Extends the feature from the sketch plane equally in both directions. Specify a depth.