Conversion of Sketch Lines to Construction Geometry You can convert sketched entities into construction geometry to use in creating model geometry. Parent topicReference Geometry Selecting Reference Geometry Planes Axes Center of Mass Points Coordinate Systems Reference Points Updating Reference Geometry in Document Templates Grid System Bounding Boxes Converting One or More Sketch Entities to Construction Geometry To convert one or more sketch entities to construction geometry: In an open sketch, select the sketch entities to convert. Do one of the following:Click Construction Geometry on the Sketch toolbar. Select the For construction check box in the PropertyManager. Converting Sketch Entities in a Drawing to Construction Geometry To convert sketch entities in a drawing to construction geometry: Select the sketch entities that you want to convert and use one of the following methods: Click Construction Geometry on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager. Right-click any selected sketch entity and select Construction Geometry.
Conversion of Sketch Lines to Construction Geometry You can convert sketched entities into construction geometry to use in creating model geometry. Parent topicReference Geometry Selecting Reference Geometry Planes Axes Center of Mass Points Coordinate Systems Reference Points Updating Reference Geometry in Document Templates Grid System Bounding Boxes Converting One or More Sketch Entities to Construction Geometry To convert one or more sketch entities to construction geometry: In an open sketch, select the sketch entities to convert. Do one of the following:Click Construction Geometry on the Sketch toolbar. Select the For construction check box in the PropertyManager. Converting Sketch Entities in a Drawing to Construction Geometry To convert sketch entities in a drawing to construction geometry: Select the sketch entities that you want to convert and use one of the following methods: Click Construction Geometry on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager. Right-click any selected sketch entity and select Construction Geometry.
Converting One or More Sketch Entities to Construction Geometry To convert one or more sketch entities to construction geometry: In an open sketch, select the sketch entities to convert. Do one of the following:Click Construction Geometry on the Sketch toolbar. Select the For construction check box in the PropertyManager.
Converting Sketch Entities in a Drawing to Construction Geometry To convert sketch entities in a drawing to construction geometry: Select the sketch entities that you want to convert and use one of the following methods: Click Construction Geometry on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager. Right-click any selected sketch entity and select Construction Geometry.