DrawCompare

Use DrawCompare to compare all entities between two drawing documents. The differences between the drawings are displayed in color codes.

DrawCompare compares the bitmaps of two drawings at the bit level. Only visual changes are captured when the drawings are compared. For example, if you move an annotation 2mm to the left, this change is reflected in the comparison. Conversely, if you change a custom property such as the Description, this does not reflect in the comparison.

Using DrawCompare

To use DrawCompare:

  1. Click Tools > Compare > DrawCompare.
  2. For Drawing 1, click Browse to locate a drawing.
    Click Change Drawing 1 Color PM_blue.gif to change the color used to display the differences in drawing 1.
  3. Repeat step 2 for Drawing 2.
    Click Change Drawing 2 Color PM_green.gif to change the color used to display the differences in drawing 2.
  4. Click Compare Drawings button_compare_drawings.gif.
    When the comparison is complete, the following appears in the dialog box:
    • Differences. Shows both drawings superimposed.
    • Drawing 1 and Drawing 2. Shows an image of both drawings that were compared.
  5. After the comparison, select from the following:
    • Additions. Clears Drawing 2 from the Differences display.
    • Removals. Clears Drawing 1 from the Differences display.
    • Open Results . Opens previously saved DrawCompare results.
    • Save Results button_compare_drawings_save.gif. Saves the DrawCompare results as a compared bitmap file (*.Compare.BMP).
  6. Close the dialog box.