The plane on which a sketch lies is configurable through the Sketch Plane PropertyManager. You can place a single sketch on different planes in different configurations.
To change a sketch plane in a configuration:
-
In the FeatureManager design tree, right-click a sketch and select Edit Sketch Plane.
The Sketch Plane PropertyManager appears.
- Do one of the following:
- In the graphics area, click the face or plane on which you want the sketch to lie.
- Select a plane from the flyout FeatureManager design tree on which you want the sketch to lie.
- Under Configurations, select the configurations to which you want the new sketch plane to apply: This configuration, All configurations, or Specify configurations.
- Click
.
The sketch changes planes in the selected configurations.