Sketching Text To sketch text on a part: Click a face of a part. Click Text (Sketch toolbar) or Tools > Sketch Entities > Text . To create a profile for placing the text, sketch a circle or a continuous profile from lines, arcs, or splines in a sketch, close the sketch, then open another sketch for the text. In the graphics area, select an edge, curve, sketch, or sketch segment.The selected item appears under Curves . In the PropertyManager, under Text, type the text to display.The text appears in the graphics area as you type. Set the properties in the Sketch Text PropertyManager as necessary. Click . With the sketch still open, extrude or cut the text. Parent topicSketch Text Editing Sketch Text Dissolving Sketch Text into Separate Sketch Entities Using Stick Fonts Sketch Text PropertyManager