Applying Bend Radius Values Different from Gauge Table Values

To apply a bend radius value different from the gauge table value:

  1. Create a base flange, and in the PropertyManager, under Sheet Metal Gauges, select Use gauge table and then select a table PM_shm_gauge_table.gif.
  2. Add another sheet metal feature to the part.
  3. In the PropertyManager, clear Use default radius, and select Use gauge table.
  4. In the sheet metal gauge table, select another value for the bend radius.
    If you change the default value by using a different sheet metal gauge table bend radius value, the feature maintains its set value and does not change.