Creating Advanced Hole Elements To create advanced hole elements: Create a simple extruded block part. To better visualize the previews, Ctrl +select all faces and click Appearances. In the Task Pane, under Glass, double-click clear glass to apply this appearance. Click Advanced Hole (Features toolbar) or Insert > Features > Advanced Hole . The PropertyManager opens with the Near Side flyout displayed. In the PropertyManager, on the Type tab, under Near And Far Side Faces, select a face.A temporary preview of the hole appears. The location is temporary, based on your initial selection on the face. You set the position later. In the Near Side flyout, click Insert Element Below Active Element to add a Near Side element to the advanced hole. In the PropertyManager, under Near and Far Side Faces, select Far Side, then select the opposite face on the model. The Near Side flyout now displays two Near Side elements. The Far Side flyout is active and contains one element. A bar separates the flyouts. The default element type in flyouts is Counterbore . Next, you set the element specifications. Parent topicAdvanced Holes Setting Element Specifications for Advanced Holes Customizing Advanced Hole Callouts Creating and Positioning Advanced Hole Instances Creating Advanced Holes Advanced Hole Type PropertyManager Advanced Hole Positions PropertyManager