Applying a Bend Radius Value Different from the Gauge/Bend Table Value

To apply a bend radius value different from the gauge table value:

  1. Create a base flange.
  2. In the Base Flange PropertyManager, under Sheet Metal Gauges, select Use gauge table, and then select a table .
  3. Click .
  4. Add another sheet metal feature to the part.
  5. In the new feature's PropertyManager, clear Use default radius, and select Use gauge table.
  6. Select another value for the bend radius.

    If you change the default value by using a different gauge table bend radius value, the feature maintains its set value and does not change.