Use the Sheet Metal tab
to link the sheet metal parameters to the
material. If you change the material, the sheet metal parameters also update.
Options on this tab are available for custom materials only.
To display this dialog box:
Open a part, right-click Material
in the FeatureManager design tree, and click
Edit Material.
Sheet metal properties
| Gauge Table, Bend
Table, Bend Calculation
Table |
Sets the type of table for the
length calculation method. Click Browse to
browse to a table. |
| Thickness Range |
Sets the thickness ranges
where you can assign different values for different thickness
ranges. Thickness ranges must be continuous; there cannot be a
gap in the range. For example, you cannot define a range from 0
to 3 and define the next range from 4 to 6 because the range
between 3 and 4 is not covered.
- From. Start value of the range.
- <. Operator that defines the start
range.
- Thickness. Non-editable field.
- <=. Operator that defines the end
range.
- To. End value of the range.
- Unit. Unit of measurement.
- Bend Allowance. Length calculation
method.
- Value. Assigned value.
|
| Add |
Adds a row to the
Thickness Range table. |
| Remove |
Removes a row from the
Thickness Range table. |
| Export |
Saves the Thickness
Range table as a Microsoft Excel file. |
| Import |
Imports Thickness Range data from a
Microsoft Excel file. |