Hide Table of Contents
dsApplicationOptionInt16_e Enumeration

Application options with Int16 values.

.NET Syntax

Visual Basic (Declaration) 
Public Enum dsApplicationOptionInt16_e 
   Inherits System.Enum
C# 
public enum dsApplicationOptionInt16_e : System.Enum
JavaScript 
dsApplicationOptionInt16_e : String
COM native C++ 
enum dsApplicationOptionInt16_e
C++ 
enum dsApplicationOptionInt16_e

Members

MemberDescription
dsApplicationOptionInt16_CountNot used
dsApplicationOptionInt16_EnblBlkXpld1 = Explode non-uniformly scaled (NUS) blocks (only affects explode command):
  • 0 = False
  • 1 = True
dsApplicationOptionInt16_EnblChmfAng2 = Set chamfer input method:
  • 0 = Two chamfer distances
  • 1 = One chamfer length and one angle
dsApplicationOptionInt16_EnblCmdDlgs3 = Show in-place text editor for the LEADER and QLEADER commands:
  • 0 = Off
  • 1 = On
dsApplicationOptionInt16_EnblDrgDsp4 = Display outlines of dragged entities:
  • 0 = Off
  • 1 = Not implemented
  • 2 = On
dsApplicationOptionInt16_EnblEdgeExtd5 = Set TRIM and EXTEND commands for cutting and boundary edges:
  • 0 = Use the selected edge without an extension
  • 1 = Extend or trim the selected entity to an imaginary extension of the cutting or boundary edge
dsApplicationOptionInt16_EnblEGripBlk6 = Tools > Options > User Preferences > Drafting Options > Entity Selection > EGrips Options > Enable EGrips in Blocks:
  • 0 = Enable EntityGrips (EGrips)
  • 1 = Enable EGrips in Blocks
dsApplicationOptionInt16_EnblEGripTpDsp7 = Tools > Options > User Preferences > Drafting Options > Entity Selection > EGrips Options > Enable EGrips tips:
  • 0 = Enable EGrips tips off
  • 1 = Enable EGrips tips on
    • dsApplicationOptionInt16_EnblEntSelHlt8 = Tools > Options > User Preferences > Drafting Options > Entity Selection > Pre-selected highlighting > When prompted to specify entities:
  • 0 = Off
  • 1 = On
    • dsApplicationOptionInt16_EnblETrkDsp9 = Tools > Options > User Preferences > Drafting Options > Display > ETrack > Display ETrack guides across screen:
  • 0 = Off
  • 1 = On
    • dsApplicationOptionInt16_EnblFltTrm10 = Trim selected chamfer and fillet edges:
    • 0 = Off
    • 1 = On
    dsApplicationOptionInt16_EnblMMBPan11 = Set the behavior of the third button or wheel on the mouse:
    • 0 = Supports the action defined in the customization file
    • 1 = Supports panning
    dsApplicationOptionInt16_EnblMutt12 = Set whether to suppress displaying a message when it typically would not be suppressed:
    • 0 = Off
    • 1 = On
    dsApplicationOptionInt16_EnblPEdtCnvrtWrng13 =  Set whether to suppress the error message in PEDIT when the selected entity is not a PolyLine:
    • 0 = Off
    • 1 = On
    dsApplicationOptionInt16_EnblRSnp14 = Tools > Options > User Preferences > Drafting Options > Pointer Control > Snap Settings > Radial (RSnap):
  • 0 = Off
  • 1 = On
    • dsApplicationOptionInt16_EnblTlTps15 = Tools > Options > System Options > Graphics Area > Display ESnap tooltips:
  • 0 = Off
  • 1 = On
    • dsApplicationOptionInt16_GetNmCdePg16 = Show the system code page, which is determined by the operating system (read only)
    dsApplicationOptionInt16_GetStatScreen17 = Get screen state (read only):
    • 1 = Text screen is displayed
    • 2 = Drawing area is displayed
    • 3 = Both screens are displayed
    dsApplicationOptionInt16_LgcyACISOUTVER18 = Set ACIS version of SAT files created using ACISOUT command; valid values 15-18, 20, 21, 30, 31, 40, 50, 60, and 70 (see Remarks)
    dsApplicationOptionInt16_LgcySTARTUP19 = Specify 0 or 1 to display the Specify Template dialog when NEW is typed at the command prompt, or to create a new drawing document when QNEW command is typed in the command prompt (see Remarks)
    dsApplicationOptionInt16_LgcyWMFBKGND20 = Set the background display when entities are inserted in Windows metafile format (WMF) (see Remarks):
    • 0 = background is transparent; foreground color is dsCommandOptionInt16_LgcyWMFFOREGND
    • 1 = background color same as drawing's current background color; foreground color unchanged
    dsApplicationOptionInt16_LgcyWMFFOREGND21 = Set the foreground color when entities are inserted in WMF (see Remarks):
    • 0 = If needed, foreground and background colors are swapped so that the foreground color is darker than the background color
    • 1 = If needed, foreground and background colors are swapped so that the foreground color is lighter than the background color
    dsApplicationOptionInt16_SetActBlkInsUnt22 = Tools > Options > System Options > Drawing File Defaults > Block insertion units > Units for inserting entities:
    • 0 = Unitless
    • 1 = Inches
    • 2 = Feet
    • 3 = Miles
    • 4 = Millimeters
    • 5 = Centimeters
    • 6 = Meters
    • 7 = Kilometers
    • 8 = Microinches
    • 9 = Mils
    • 10 = Yards
    • 11 = Angstroms
    • 12 = Nanometers
    • 13 = Microns
    • 14 = Decimeters
    • 16 = Hectometers
    • 17 = Gigameters
    • 18 = Astronomical
    • 19 = Light Years
    • 20 = Parsecs
    dsApplicationOptionInt16_SetBAttMode23 = Sets BlockAttribute options (bitcode):
    • 0 = None
    • 1 = Invisible
    • 2 = Constant
    • 4 = Verify
    • 8 = Preset
    • 16 = Lock position in Block
    dsApplicationOptionInt16_SetCCSAxisAng24 = Set the default angle, in degrees, when rotating the CCS around one of its axes using the x, y, or z option of the CCS command:
    • 5
    • 10
    • 15
    • 18
    • 22.5
    • 30
    • 45
    • 90
    • 180
    dsApplicationOptionInt16_SetCOLORTHEMEDo not use.
    dsApplicationOptionInt16_SetCompEdFd25 = Set the fading intensity for references being edited in-place; valid values 0-90
    dsApplicationOptionInt16_SetCrdDsp26 = Set how often to update and the format of the coordinates on the status line:
    • 0 = Only when points are specified
    • 1 = Continuously
    • 2 = Continuously except when a point, distance, or angle is requested; then relative polar coordinates are displayed for x and y; z is always displayed as an absolute coordinate
    • 3 = Continuously with latitude and longitude coordinate values of geographic location
    dsApplicationOptionInt16_SetDfltLWt27 = Tools > Options > Drafting Styles > Active Drafting Styles > Line Font > Line Weight > Default Weight:
    • -3 = Default
    • -2 = ByBlock
    • -1 = ByLayer
    • 0 = 0.00 mm or inches
    • 5 = 0.05 mm or 0.002 inches
    • 9 = 0.09 mm or 0.004 inches
    • 13 = 0.13 mm or 0.005 inches
    • 15 = 0.15 mm or 0.006 inches
    • 18 = 0.18 mm or 0.007 inches
    • 20 = 0.20 mm or 0.008 inches
    • 25 = 0.25 mm or 0.010 inches
    • 30 = 0.30 mm or 0.012 inches
    • 35 = 0.35 mm or 0.014 inches
    • 40 = 0.40 mm or 0.016 inches
    • 50 = 0.50 mm or 0.020 inches
    • 53 = 0.53 mm or 0.021 inches
    • 60 = 0.60 mm or 0.024 inches
    • 70 = 0.70 mm or 0.028 inches
    • 80 = 0.80 mm or 0.031 inches
    • 90 = 0.90 mm or 0.035 inches
    • 100 = 1.00 mm or 0.039 inches
    • 106 = 1.06 mm or 0.042 inches
    • 120 = 1.20 mm or 0.047 inches
    • 140 = 1.40 mm or 0.055 inches
    • 158 = 1.58 mm or 0.062 inches
    • 200 = 2.00 mm or 0.079 inches
    • 211 = 2.11 mm or 0.083 inches
    dsApplicationOptionInt16_SetEGripActClr28 = Tools > Options > User Preferences > Drafting Options > Entity Selection > EGrips Colors > Active EGrips:
    • 1 = Red
    • 2 = Yellow
    • 3 = Green
    • 4 = Cyan
    • 5 = Blue
    • 6 = Magenta
    • 7 = White
    • 8 − 256 = Specify Color
    dsApplicationOptionInt16_SetEGripDspLmt29 = Tools > Options > User Preferences > Drafting Options > Entity Selection > EGrips Options > EGrip display limit; valid values 0-32767
    dsApplicationOptionInt16_SetEGripDspMode30 = Tools > Options > User Preferences > Drafting Options > Entity Selection > EGrips Options > Enable EntityGrips (EGrips):
    • 0 = Disabled
    • 1 = Enabled
    dsApplicationOptionInt16_SetEGripInActClr31 = Tools > Options > User Preferences > Drafting Options > Entity Selection > EGrips Colors > Inactive EGrips:
  • 1 = Red
  • 2 = Yellow
  • 3 = Green
  • 4 = Cyan
  • 5 = Blue
  • 6 = Magenta
  • 7 = White
  • 8 − 256 = Specify Color
    • dsApplicationOptionInt16_SetEntSelMode32 = Tools > Options > User Preferences > Drafting Options > Entity Selection > Selection Settings > Enable EntityGroup selection sets:
    • 0 = Disabled
    • 1 = Enabled
    dsApplicationOptionInt16_SetESnpMode33 = Tools > Options > User Preferences > Drafting Options > Pointer Control > Entity Snaps (bitcode):
    • 0 = Clear entity snaps
    • 1 = End
    • 2 = Midpoint
    • 4 = Center
    • 8 = Node
    • 16 = Quadrant
    • 32 = Intersection
    • 64 = Insert
    • 128 = Perpendicular
    • 256 = Tangent
    • 512 = Nearest
    • 2048 = Visual Intersection
    • 4096 = Extension
    dsApplicationOptionInt16_SetGBoxSz34 = Tools > Options > User Preferences > Drafting Options > Display > Gravity Box > GravityBox size; valid values 1-20
    dsApplicationOptionInt16_SetHtchRltvMode35 = Set whether hatch patterns and gradient fills are associated with their boundaries:
    • No
    • Yes; updated when their boundaries change
    dsApplicationOptionInt16_SetLogMode36 = Set whether to write the contents of the text window to a log file:
    • 0 = No
    • 1 = Yes
    dsApplicationOptionInt16_SetLWtUnt37 = Tools > Options > Drafting Styles > Active Drafting Styles > Line Font > Line Weight > Inches or Millimeters:
    • 0 = Inches
    • 1 = Millimeters
    dsApplicationOptionInt16_SetMnuEcho38 = Specify menu echo behavior:
    • 1 = Suppress echo of menu items
    • 2 = Suppress display of system prompts during menu
    • 4 = Disable menu echo ^P toggle
    • 8 = Display input/output strings
    dsApplicationOptionInt16_SetOfstGapMode39 = Specify how to handle gaps between segments for closed PolyLines that are offset:
    • 0 = Fill gaps by extending PolyLine segments
    • 1 = Fill gaps with filleted arc segments, where the radius of each arc segment is equal to the offset distance
    • 2 = Fill gaps with chamfered line segments, where the perpendicular distance to each chamfer is equal to the offset distance
    dsApplicationOptionInt16_SetOLEQlty40 = Control the default print quality for OLE objects:
    • 0 = Monochrome
    • 1 = Low graphics
    • 2 = High graphics
    • 3 = Automatically select
    dsApplicationOptionInt16_SetPGonSides41 =  Specifies the default number for POLYGON; valid values: 3-1024
    dsApplicationOptionInt16_SetPntrSz42 = Tools > Options > System Options > Graphics Area > Pointer size; valid values: 1-100 percent
    dsApplicationOptionInt16_SetPrnRot43 = Sets print orientation:
    • 0 = Rotate the printing area so that the corner with the Rotation icon aligns with the paper at the lower left for 0, top left for 90, top right for 180, and lower right for 270; x and y origin offsets are calculated relative to the lower-left corner
    • 1 = Align the lower-left corner of the printing area with the lower-left corner of the paper
    • 2 = Behave like 0 value, except that x and Y origin offsets are calculated relative to the rotated origin position
    dsApplicationOptionInt16_SetProjMode44 = Specify the projection mode used with TRIM and EXTEND:
    • 0 = No projection
    • 1 = Project x,y plane of the current CCS
    • 2 = Project to current view plane
    dsApplicationOptionInt16_SetPrxyDspMode45 = Specify how to show proxy objects in drawings:
    • 0 = Not displayed
    • 1 = Images displayed for all proxy objects
    • 2 = Only bounding box displayed for all proxy objects
    dsApplicationOptionInt16_SetSelBoxSz46 = Tools > Options > User Preferences > Drafting Options > Entity Selection > Selection Settings > SelectionBox size; valid values 0-50
    dsApplicationOptionInt16_SetShrtCtMnuMode47 = Tools > Options > User Preferences > Mouse Options > Options > Display shortcut menus by right-clicking; valid values 0-20
    dsApplicationOptionInt16_Undefined48 = Undefined

    Remarks

    The string Lgcy in a command option indicates that setting the command option has no effect in DraftSight; however, the value is stored in the DWG file.

    In most instances, user-interface command option equivalents are the strings following dsApplicationOptionInt16_; for example, typing EnblBlkXpld in the command prompt is equivalent to using dsApplicationOptionInt16_EnblBlkXpld in code.

    See Also



    Provide feedback on this topic

    SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

    * Required

     
    *Email:  
    Subject:   Feedback on Help Topics
    Page:   dsApplicationOptionInt16_e Enumeration
    *Comment:  
    *   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

    Print Topic

    Select the scope of content to print:

    x

    We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

     Never show this message again
    x

    Web Help Content Version: API Help (English only) 2024 SP05

    To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

    To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

    0.20.10