Connectors SOLIDWORKS Electrical automatically manages the connector drawn by the dynamic insertion of a symbol, but you can also use the symbol insertion basic command. The automatic connector graphics use settings stored in the configuration. Contents Adding Connectors You can add a connector component type in the dockable panel from a location or a component. Configuring Connectors You can specify the configuration of the connectors. Single Dynamic Insertion Configuration When you use this type of configuration file, the connector will automatically be drawn with one symbol. Multiple Symbol Insertion Configuration When you use this type of configuration file, the connector will be automatically drawn with several symbols corresponding to the connector pins. Inserting Connectors You can insert a connector from the Schematic menu or from the dockable panel. Inserting Connector Symbols You can insert a symbol representing a connector derived from symbol insertion. This lets you represent the connector using a symbol you have defined yourself beforehand. Parent topicSOLIDWORKS Electrical