A Sheet-Metal1 feature in the FeatureManager
design tree indicates a sheet metal part. The Sheet-Metal1 feature contains the default bend parameters.
To edit the default bend radius, bend allowance or bend deduction, or default relief type:
-
In the FeatureManager design tree, right-click
Sheet-Metal
and click Edit
Feature
.
-
Under Sheet Metal
Gauges, select Use gauge
table, and select a table
.
- Under Bend Parameters:
- On the model, select a linear edge on an end face of a cylindrical or
conical face, or select a planar face for Fixed
Face or Edge
.The
edge or face remains in place when the part is flattened.
This step is not necessary if you start
your sheet metal part from a Base Flange
feature.
- Set the Bend Radius
.
-
Under Bend Allowance, select from the following: Bend Table, K-Factor, Bend Allowance, Bend Deduction, or Bend Calculation.
-
If you selected K-Factor, Bend Allowance, or Bend Deduction, set a value.
- If you selected Bend Table or Bend Calculation, select a table from the list, or click Browse to browse to a table.
- If you want relief cuts added automatically, select Auto Relief, then select the type of relief cut. If you selected Rectangular or Obround, then you must set a Relief Ratio.
- Click
.