Corner Reliefs and Bend Transitions You can apply corner treatments to a folded sheet metal body that will persist in the flattened state. You can view how the corner treatment impacts the folded sheet metal body and how it carries over to the flat pattern. You can use the following corner treatment types: Rectangular Circular Tear Obround Constant Width Full Round Suitcase You can create configuration-specific corner reliefs and suppress or unsuppress them within configurations. For example, for configuration A, you can define a corner relief by selecting all corners and applying a circular relief. In configuration B, you can select all corners and apply a rectangular relief that is suppressed in configuration A and vice versa. Contents Adding a Corner Relief You can add a corner relief to a single sheet metal body. Corner Relief PropertyManager Use the Corner Relief PropertyManager to apply corner treatments to a folded sheet metal body that persist in the flattened state. Parent topicUsing Sheet Metal Tools