Methods for machined parts include:
- Machining
- Plastic
- Casting
- 3D Printing
If the part is a single body weldment, then the Weldment option is available. If the part is sheet metal, then the method options are Sheet Metal and Machined Plate.
Machining
|
Analyzes the part for machining features such as milled pockets and drilled holes, and determine the amount of time it takes to remove that material from a stock body.
|
Plastic
|
Estimates the amount of time it takes to fill a mold with plastic based on the volume and estimated cooling time of the plastic.
|
Casting
|
Estimates the amount of time it takes to fill a mold based on the volume and cycle time that is user-specified.
|
3D Printing
|
Analyzes the part and its orientation to determine the number of layers required to print the part, and then estimates the amount of time required to print the part.
|
Weldment
|
Treats the part as an extruded weldment and determines the cost of machining based on the extruded profile rather than machining from a block or plate.
|