- Base Parts in Configurations
You can control the configuration of a base part with a design table. This is available in part documents only.
- Color Parameter in Configurations
The design table can include a column for configuration-specific colors. The value is a 32-bit integer that specifies RGB (red, green, blue). If you do not specify a value, zero (black) is used.
- Comment in Configurations
The Configuration Properties PropertyManager has a Comment box, where you can enter information about the configuration.
- Component Configuration
You can specify which configuration of a component is used in various configurations of an assembly.
- Component Part Number in Configurations
When you create configurations with a design table, the software automatically sets options in the Configuration Properties PropertyManager.
- Component Suppression State in Configurations
- Cosmetic Threads in Configurations
You can configure callouts for cosmetic threads.
- Custom Properties in Configurations
- Derived Configurations in Design Tables
You can control derived configurations in a design table.
- Description in Configurations
The Configuration Properties PropertyManager has a Description box, where you can enter a description of the configuration.
- Dimensions in Configurations
- Display States in Configurations
You can create multiple display states for each configuration of an assembly or part.A physical product can have only one display state.
- End Conditions in Configurations
You can change the end condition of extruded features in specified configurations.
- Expand in BOM in Configurations
You can control how the assembly is listed in a BOM, when this configuration is used as a subassembly.
- External Sketch Relations in Configurations
You can set different external sketch relations in specified configurations.
- Feature Suppression State in Configurations
- Shortcuts for Suppressing Items in Design Tables
The string values suppressed and unsuppressed are valid values for selected design table columns. You can use shortcuts for these string values in design tables.
- Fixed or Floating Position in Configurations
You can configure whether the position of a component is fixed or floating in an assembly.
- Global Variables in Configurations
You can configure global variables.
- Hole Sizes in Configurations
In the Hole Specification PropertyManager, you can configure the size of Hole Wizard holes by clicking Configurations and selecting This configuration, All configurations, or Specify Configurations.
- Lighting in Configurations
You can suppress and unsuppress (turn off and on) lights in configurations.
- Mass Properties in Configurations
You can configure values that you assign for mass, center of mass, and moments of inertia in parts and assemblies.
- Materials in Configurations
You can configure materials for parts and for bodies of multibody parts.
- Scale Features in Configurations
You can configure the X, Y, and Z scale factors.
- Sketch Dimensions in Configurations
You can control the driving state of sketch dimensions in specified configurations to control the behavior of your model.
- Sketch Planes in Configurations
The plane on which a sketch lies is configurable through the Sketch Plane PropertyManager. You can place a single sketch on different planes in different configurations.
- Sketch Relations in Configurations
You can control the suppression state of sketch relations per configuration.
- Sketch Suppression State in Configurations
- Split Parts in Configurations
You can control the configuration of a split part with a design table. This is available in part documents only.
- Tolerances in Configurations
- User Notes in Design Tables
The design table can include additional columns or rows for information only (notes, intermediate calculations, and so on).