With Large Assembly Settings enabled, you can defer the full update of
assemblies until you are ready to rebuild the assembly. By deferring the update, you can
make many changes, then rebuild the assembly once.
If required, the assembly rebuilds automatically for internal updates and to
protect the integrity of the model.
Use this option only when required. Rebuild errors created
while this option is active do not become apparent until you clear this option
or you manually rebuild. Determining the cause of the errors can be difficult
after you deactivate the option and rebuild the assembly.
To defer the full update of assemblies:
Click and under Large Assembly Settings, select
Suspend automatic rebuild.
If you are editing either a mate or items above Mates
in the FeatureManager design tree and
Suspend automatic rebuild is selected, items after
Mates
are not automatically rebuilt.
If you create or edit an assembly feature with this option enabled, the assembly is
updated until you finish editing the feature.
To manually update when in Suspend automatic
rebuild mode, click Rebuild
on the Standard toolbar.
In an active assembly, operations for the center of mass linked to mass properties update
only when they take 0.5 seconds or less. If the update takes more than 0.5
seconds, the center of mass is marked with ,
and is not updated until you initiate a rebuild manually.