You can add a corner relief to a single sheet metal body.
-
Click Corner Relief
(Sheet Metal toolbar) or .
- In the Corner Relief PropertyManager, under Corner Type, select a two or three bend corner.
-
Under Scope
, select the sheet metal body to which to
apply the corner relief.
-
Under Corners
, click Collect all corners to list all corners in the
sheet metal body.
If you list multiple corners, you can specify multiple corner
relief treatments.
When you select a corner in the Corners section, the faces that define the
corner are shown in the Define Corner
section and the corner is highlighted in the graphics area.
- To add an individual corner instead of collecting all corners, in the Define Corner section, select the faces that define the corner and click New Corner.
The corner is added to the list in the Corners section.
-
With a corner selected, under Relief
Options
, select the type of relief to apply.
The relief type determines other options you can
specify:
Available options |
Rectangular |
Circular |
Tear |
Obround |
Constant Width |
Full Round |
Suitcase |
Centered on bend
lines |
Yes |
Yes |
NA |
Yes |
NA |
NA |
NA |
Slot Length |
Yes |
Yes |
NA |
Yes |
NA |
NA |
NA |
Ratio to thickness |
Yes |
Yes |
NA |
Yes |
NA |
NA |
NA |
Tangent to bend |
Yes |
Yes |
NA |
NA |
NA |
NA |
NA |
Add filleted
corners |
Yes |
NA |
NA |
NA |
NA |
NA |
NA |
Corner Fillets |
Yes |
NA |
NA |
NA |
NA |
NA |
NA |
Slot Width |
NA |
Yes |
NA |
Yes |
NA |
NA |
NA |
Narrow corner |
Yes |
Yes |
NA |
Yes |
NA |
NA |
NA |
Previews of your choices appear in the graphics
area.
- Click
.
- Click Flatten
(Sheet Metal toolbar) to see how the corner relief appears in the flattened sheet metal part.