Hide Table of Contents

Create Frequency Study with Mixed Mesh Example (VBA)

This example shows how to create a frequency study using a mixed mesh.

NOTE: To get persistent reference identifiers (PIDs) for model selections, you can use pidcollector.exe or IModelDocExtension::GetPersistReference3.

'----------------------------------------------------------------------------
' Preconditions:
' 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click
'    Tools > Add-ins > SOLIDWORKS Simulation > OK).
' 2. Add the SOLIDWORKS Simulation type library as a reference (in the IDE,
'    click Tools > References > SOLIDWORKS Simulation version type library).
' 3. Ensure that the specified material library exists.
' 4. Ensure that the specified model document exists.
' 5. Open the Immediate window.
'
' Postconditions:
' 1. Opens the model.
' 2. Creates a frequency mixed-mesh study.
' 3. Applies material.
' 4. Adds a fixed restraint.
' 5. Adds a bonded contact set.
' 6. Creates a mesh.
' 7. Runs an analysis.
' 8. Inspect the Immediate window.
'
' NOTE: Because the model is used elsewhere, do not save changes.
'----------------------------------------------------------------------------

Option Explicit

Sub main()

 

   Dim SwApp As SldWorks.SldWorks

   Dim COSMOSWORKS As Object

   Dim COSMOSObject As CosmosWorksLib.CwAddincallback

   Dim ActDoc As CosmosWorksLib.CWModelDoc

   Dim StudyMngr As CosmosWorksLib.CWStudyManager

   Dim Study As CosmosWorksLib.CWStudy

   Dim SolidMgr As CosmosWorksLib.CWSolidManager

   Dim SolidComponent As CosmosWorksLib.CWSolidComponent

   Dim SolidBody As CosmosWorksLib.CWSolidBody

   Dim Shell As CosmosWorksLib.CWShell

   Dim CwMesh As CosmosWorksLib.CWMesh

   Dim CWResult As CosmosWorksLib.CWResults

   Dim Part As SldWorks.ModelDoc2

   Dim ShellMgr As CosmosWorksLib.CWShellManager

   Dim LBCMgr As CosmosWorksLib.CWLoadsAndRestraintsManager

   Dim ContactMgr As CosmosWorksLib.CWContactManager

   Dim CWContactSet As CosmosWorksLib.CWContactSet

   Dim CWRes1 As CosmosWorksLib.CWRestraint

   Dim pDisp1 As Object, pDisp2 As Object

   Dim oselect1 As Object, oselect2 As Object, oselect3 As Object, oselect4 As Object, oselect5 As Object

   Dim oselect6 As Object

   Dim var1 As Variant, var2 As Variant, var3 As Variant, var4 As Variant

   Dim var5 As Variant, var6 As Variant, var8 As Variant

   Dim var9 As Variant

   Dim varArray1 As Variant

   Dim varArray2 As Variant

   Dim varArray3 As Variant

   Dim varArray4 As Variant

   Dim Freq As Variant

   Dim bApp As Boolean

   Dim str1 As String, str2 As String

   Dim selectionShell As String

   Dim selection1 As String

   Dim selection2 As String

   Dim selection3 As String

   Dim selection4 As String

   Dim selection5 As String

   Dim selection6 As String

   Dim longstatus As Long, longwarnings As Long

   Dim errCode As Long

   Dim el As Double, tl As Double

   Dim i as Long

 

   ' Open document

   Set SwApp = Application.SldWorks

   SwApp.OpenDoc6 "C:\Users\Public\Documents\SOLIDWORKS\SOLIDWORKS 2019\samples\Simulation Examples\mixedmesh-1.sldasm", swDocASSEMBLY, swOpenDocOptions_Silent, "", longstatus, longwarnings

   Set Part = SwApp.ActiveDoc()

 

   ' Get the SOLIDWORKS Simulation object

   Set COSMOSObject = SwApp.GetAddInObject("SldWorks.Simulation")

   If COSMOSObject Is Nothing Then ErrorMsg SwApp, "COSMOSObject object not found"

   Set COSMOSWORKS = COSMOSObject.COSMOSWORKS

   If COSMOSWORKS Is Nothing Then ErrorMsg SwApp, "COSMOSWORKS object not found"

    

   ' Open and get active document

   Set ActDoc = COSMOSWORKS.ActiveDoc()

   If ActDoc Is Nothing Then ErrorMsg SwApp, "No active document"

 

   ' Create new frequency study

   Set StudyMngr = ActDoc.StudyManager()

   If StudyMngr Is Nothing Then ErrorMsg SwApp, "No CWStudyManager object"

   Set Study = StudyMngr.CreateNewStudy3("Frequency_Mixed", swsAnalysisStudyTypeFrequency, 0, errCode)

   If Study Is Nothing Then ErrorMsg SwApp, "Frequency study not created"

 

  ' Get selections for restraint

  ' Faces of the six holes in the solid

   selection1 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

   selection1 = selection1 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,16,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

   selection1 = selection1 & ",Type=1"

   StringtoArray selection1, var1

   Set oselect1 = Part.Extension.GetObjectByPersistReference3((var1), longstatus)

   selection2 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

   selection2 = selection2 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,15,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

   selection2 = selection2 & ",Type=1"

   StringtoArray selection2, var2

   Set oselect2 = Part.Extension.GetObjectByPersistReference3((var2), longstatus)

   selection3 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

   selection3 = selection3 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,14,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

   selection3 = selection3 & ",Type=1"

   StringtoArray selection3, var3

   Set oselect3 = Part.Extension.GetObjectByPersistReference3((var3), longstatus)

   selection4 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

   selection4 = selection4 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,11,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,6,0,0,0,0,0,0,0,0,0,0,0,0,0"

   selection4 = selection4 & ",Type=1"

   StringtoArray selection4, var4

   Set oselect4 = Part.Extension.GetObjectByPersistReference3((var4), longstatus)

   selection5 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

   selection5 = selection5 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,12,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,6,0,0,0,0,0,0,0,0,0,0,0,0,0"

   selection5 = selection5 & ",Type=1"

   StringtoArray selection5, var5

   Set oselect5 = Part.Extension.GetObjectByPersistReference3((var5), longstatus)

   selection6 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

   selection6 = selection6 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,13,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,6,0,0,0,0,0,0,0,0,0,0,0,0,0"

   selection6 = selection6 & ",Type=1"

   StringtoArray selection6, var6

   Set oselect6 = Part.Extension.GetObjectByPersistReference3((var6), longstatus)

 

   ' Get selections for contact set

   ' Shell edge

   str1 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,69,100,103,101,82,101,102,95,99,1,0,0,0,0,0,0,0,4,0,0,0,0,0,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,120,0,97,0,109"

   str1 = str1 & ",0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,24,0,0,0,26,50,104,66,9,0,0,0,3,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,10,0,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,1,0,0,0,0,0,0,0,14,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,0,0,0,0,0,0,0,0,0,0,0,0"

   StringtoArray str1, var8

   Set pDisp1 = Part.Extension.GetObjectByPersistReference3((var8), longstatus)

   ' Solid face

   str2 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,6,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,120,0,97,0,109,0"

   str2 = str2 & ",112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,24,0,0,0,26,50,104,66,11,0,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,0,0,0,0,0,0,0,0,3,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,10,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,1,0,0,0,0,0,0,0,3,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

   StringtoArray str2, var9

   Set pDisp2 = Part.Extension.GetObjectByPersistReference3((var9), longstatus)

 

   ' Create arrays

   varArray2 = Array(oselect1, oselect2, oselect3, oselect4, oselect5, oselect6)

   varArray3 = Array(pDisp1)

   varArray4 = Array(pDisp2)

 

   ' Add bonded contact set

   Set ContactMgr = Study.ContactManager

   If errCode <> 0 Then ErrorMsg SwApp, "No ContactManager object"

   Set CWContactSet = ContactMgr.CreateContactSet2(swsContactTypeBonded, 0, (varArray3), (varArray4), errCode)

   If errCode <> 0 Then ErrorMsg SwApp, "No CWContactSet object"

   Debug.Print CWContactSet.ContactName & " is suppressed? (1=yes, 0=no) " & CWContactSet.State

   ' If contact set is suppressed, unsuppress it

    If CWContactSet.State = 1 Then

        errCode = ContactMgr.SuppressUnsuppressContactPair(CWContactSet.ContactName, 0)

    End If
  

   ' Apply material to shell

   Set ShellMgr = Study.ShellManager

   If ShellMgr Is Nothing Then ErrorMsg SwApp, "No CWShellManager object"

   Set Shell = ShellMgr.GetShellAt(0, errCode)

   bApp = Shell.SetLibraryMaterial2("c:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks materials.sldmat", "Ductile Iron")

   If bApp = False Then ErrorMsg SwApp, "No material applied"

    

   ' Define shell properties

   Shell.ShellBeginEdit

   Shell.Formulation = 0

   Shell.ShellUnit = 0

   Shell.ShellThickness = 5#

   errCode = Shell.ShellEndEdit

   If errCode <> 0 Then ErrorMsg SwApp, "Shell not created"

 

   ' Apply material to solid

   Set SolidMgr = Study.SolidManager

   If SolidMgr Is Nothing Then ErrorMsg SwApp, "No CWSolidManager object"

   Set SolidComponent = SolidMgr.GetComponentAt(1, errCode)

   If errCode <> 0 Then ErrorMsg SwApp, "No solid component"

   Set SolidBody = SolidComponent.GetSolidBodyAt(0, errCode)

   If errCode <> 0 Then ErrorMsg SwApp, "No solid body"

   bApp = SolidBody.SetLibraryMaterial("c:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks materials.sldmat", "Ductile Iron")

   If bApp = False Then ErrorMsg SwApp, "No material applied"

    

   ' Add fixed restraint

   Set LBCMgr = Study.LoadsAndRestraintsManager

   Set CWRes1 = LBCMgr.AddRestraint(swsRestraintTypeFixed, (varArray2), Nothing, errCode)

   If errCode <> 0 Then ErrorMsg SwApp, "No fixed restraint created"
 

   ' Set meshing

   Set CwMesh = Study.Mesh

   If CwMesh Is Nothing Then ErrorMsg SwApp, "No mesh object"

   CwMesh.Quality = 1

   Call CwMesh.GetDefaultElementSizeAndTolerance(swsLinearUnitMillimeters, el, tl)

   errCode = Study.CreateMesh(swsLinearUnitMillimeters, el, tl)

   If errCode <> 0 Then ErrorMsg SwApp, "Mesh failed"

 

   ' Run analysis

   errCode = Study.RunAnalysis

   If errCode <> 0 Then ErrorMsg SwApp, "Analysis failed with error code as defined in swsRunAnalysisError_e: " & errCode

    

   ' Get results

   Set CWResult = Study.Results

   If CWResult Is Nothing Then ErrorMsg SwApp, "No result object"

   Freq = CWResult.GetResonantFrequencies(errCode)

   If errCode <> 0 Then ErrorMsg SwApp, "No frequency result"
  
   Debug.Print "Resonant Frequencies:"

   For i = 0 To UBound(Freq)

       Debug.Print Freq(i)

   Next i

 

End Sub

 

Sub ErrorMsg(SwApp As SldWorks.SldWorks, Message As String)

   SwApp.SendMsgToUser2 Message, 0, 0

   SwApp.RecordLine "'*** WARNING - General"

   SwApp.RecordLine "'*** " & Message

   SwApp.RecordLine ""

End Sub

 

Function StringtoArray(inputSTR As String, varEntity As Variant)

   Dim PID() As Byte

   Dim i As Integer

   varEntity = Split(inputSTR, ",")

   ReDim PID(UBound(varEntity))

   For i = 0 To (UBound(varEntity) - 1)

   PID(i) = varEntity(i)

   Next i

   varEntity = PID

End Function



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Create Frequency Study with Mixed Mesh Example (VBA)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2024 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.62