Hide Table of Contents

Create Frequency Study with Mixed Mesh Example (VB.NET)

This example shows how to create a frequency study using a mixed mesh.

NOTE: To get persistent reference identifiers (PIDs) for model selections, you can use pidcollector.exe or IModelDocExtension::GetPersistReference3.

'----------------------------------------------------------------------------
' Preconditions:
 ' 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click 
'    Tools > Add-ins > SOLIDWORKS Simulation > OK).
' 2. Add the SOLIDWORKS Simulation primary interop assembly as a reference
'    (in the IDE, click Project > Add Reference > .NET > 
'    SolidWorks.Interop.cosworks > OK).
' 3. Ensure that the specified material library exists.
' 4. Ensure that the specified model document exists.
' 5. Open the Immediate window.
'
' Postconditions:
' 1. Opens the model.
' 2. Creates a frequency mixed-mesh study.
' 3. Applies material.
' 4. Adds a fixed restraint.
' 5. Adds a bonded contact set.
' 6. Creates a mesh.
' 7. Runs an analysis.
' 8. Inspect the Immediate window.
'
' NOTE: Because the model is used elsewhere, do not save changes.
'---------------------------------------------------------------------------

Imports SolidWorks.Interop.sldworks

Imports SolidWorks.Interop.swconst

Imports SolidWorks.Interop.cosworks

Imports System

Imports System.Diagnostics

 

Partial Class SolidWorksMacro

 

    Public Sub main()

 

        Dim COSMOSWORKS As Object

        Dim COSMOSObject As CwAddincallback

        Dim ActDoc As CWModelDoc

        Dim StudyMngr As CWStudyManager

        Dim Study As CWStudy

        Dim SolidMgr As CWSolidManager

        Dim SolidComponent As CWSolidComponent

        Dim SolidBody As CWSolidBody

        Dim Shell As CWShell

        Dim CwMesh As CWMesh

        Dim CWResult As CWResults

        Dim Part As ModelDoc2

        Dim ShellMgr As CWShellManager

        Dim LBCMgr As CWLoadsAndRestraintsManager

        Dim ContactMgr As CWContactManager

        Dim CWContactSet As CWContactSet

        Dim CWRes1 As CWRestraint

        Dim pDisp1 As Object, pDisp2 As Object

        Dim oselect1 As Object, oselect2 As Object, oselect3 As Object, oselect4 As Object, oselect5 As Object

        Dim oselect6 As Object

        Dim var1 As Object = Nothing

        Dim var2 As Object = Nothing

        Dim var3 As Object = Nothing

        Dim var4 As Object = Nothing

        Dim var5 As Object = Nothing

        Dim var6 As Object = Nothing

        Dim var8 As Object = Nothing

        Dim var9 As Object = Nothing

        Dim Freq As Object

        Dim bApp As Boolean

        Dim str1 As String, str2 As String

        Dim selection1 As String

        Dim selection2 As String

        Dim selection3 As String

        Dim selection4 As String

        Dim selection5 As String

        Dim selection6 As String

        Dim longstatus As Long, longwarnings As Long

        Dim errCode As Long

        Dim el As Double, tl As Double

        Dim i as Long

 

        ' Open document

        swApp.OpenDoc6("C:\Users\Public\Documents\SOLIDWORKS\SOLIDWORKS 2019\samples\Simulation Examples\mixedmesh-1.sldasm", swDocumentTypes_e.swDocASSEMBLY, swOpenDocOptions_e.swOpenDocOptions_Silent, "", longstatus, longwarnings)

        Part = swApp.ActiveDoc()

 

        ' Get the SOLIDWORKS Simulation object

        COSMOSObject = swApp.GetAddInObject("SldWorks.Simulation")

        If COSMOSObject Is Nothing Then ErrorMsg(swApp, "COSMOSObject object not found")

        COSMOSWORKS = COSMOSObject.COSMOSWORKS

        If COSMOSWORKS Is Nothing Then ErrorMsg(swApp, "COSMOSWORKS object not found")

 

        ' Open and get active document

        ActDoc = COSMOSWORKS.ActiveDoc()

        If ActDoc Is Nothing Then ErrorMsg(swApp, "No active document")

 

        ' Create new frequency study

        StudyMngr = ActDoc.StudyManager()

        If StudyMngr Is Nothing Then ErrorMsg(swApp, "No CWStudyManager object")

        Study = StudyMngr.CreateNewStudy3("Frequency_Mixed", swsAnalysisStudyType_e.swsAnalysisStudyTypeFrequency, 0, errCode)

        If Study Is Nothing Then ErrorMsg(swApp, "Frequency study not created")

 

        ' Get selections for restraint

        ' Faces of the six holes in the solid

        selection1 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

        selection1 = selection1 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,16,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

        selection1 = selection1 & ",Type=1"

        StringtoArray(selection1, var1)

        oselect1 = Part.Extension.GetObjectByPersistReference3((var1), longstatus)

        selection2 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

        selection2 = selection2 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,15,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

        selection2 = selection2 & ",Type=1"

        StringtoArray(selection2, var2)

        oselect2 = Part.Extension.GetObjectByPersistReference3((var2), longstatus)

        selection3 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

        selection3 = selection3 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,14,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

        selection3 = selection3 & ",Type=1"

        StringtoArray(selection3, var3)

        oselect3 = Part.Extension.GetObjectByPersistReference3((var3), longstatus)

        selection4 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

        selection4 = selection4 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,11,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,6,0,0,0,0,0,0,0,0,0,0,0,0,0"

        selection4 = selection4 & ",Type=1"

        StringtoArray(selection4, var4)

        oselect4 = Part.Extension.GetObjectByPersistReference3((var4), longstatus)

        selection5 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

        selection5 = selection5 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,12,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,6,0,0,0,0,0,0,0,0,0,0,0,0,0"

        selection5 = selection5 & ",Type=1"

        StringtoArray(selection5, var5)

        oselect5 = Part.Extension.GetObjectByPersistReference3((var5), longstatus)

        selection6 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,27,0,109,111,70,114,111,109,83,107,116,69,110,116,51,73,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,12"

        selection6 = selection6 & "0,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,65,0,0,0,33,58,104,66,13,0,0,0,255,255,255,255,0,0,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,2,0,0,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,6,0,0,0,0,0,0,0,0,0,0,0,0,0"

        selection6 = selection6 & ",Type=1"

        StringtoArray(selection6, var6)

        oselect6 = Part.Extension.GetObjectByPersistReference3((var6), longstatus)

 

        ' Get selections for contact set

        ' Shell edge

        str1 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,69,100,103,101,82,101,102,95,99,1,0,0,0,0,0,0,0,4,0,0,0,0,0,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,120,0,97,0,109"

        str1 = str1 & ",0,112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,24,0,0,0,26,50,104,66,9,0,0,0,3,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,10,0,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,1,0,0,0,0,0,0,0,14,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,0,0,0,0,0,0,0,0,0,0,0,0"

        StringtoArray(str1, var8)

        pDisp1 = Part.Extension.GetObjectByPersistReference3((var8), longstatus)

        ' Solid face

        str2 = "8,17,0,0,3,0,0,0,255,254,255,27,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,45,0,51,0,64,0,109,0,105,0,120,0,101,0,100,0,109,0,101,0,115,0,104,0,45,0,49,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,17,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,6,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,79,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,92,0,83,0,111,0,108,0,105,0,100,0,87,0,111,0,114,0,107,0,115,0,32,0,83,0,105,0,109,0,117,0,108,0,97,0,116,0,105,0,111,0,110,0,92,0,69,0,120,0,97,0,109,0"

        str2 = str2 & ",112,0,108,0,101,0,115,0,92,0,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,13,77,0,105,0,120,0,101,0,100,0,45,0,49,0,45,0,83,0,111,0,108,0,105,0,100,0,2,0,0,124,49,104,66,0,0,0,48,0,0,0,0,0,0,0,0,0,2,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,48,0,24,0,0,0,26,50,104,66,11,0,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,24,0,0,0,26,50,104,66,0,0,0,0,0,0,0,0,3,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,10,0,0,0,12,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,1,0,0,0,0,0,0,0,3,128,0,0,5,128,8,0,24,0,0,0,26,50,104,66,4,0,0,0,0,0,0,0,0,0,0,0,0,0"

        StringtoArray(str2, var9)

        pDisp2 = Part.Extension.GetObjectByPersistReference3((var9), longstatus)

 

        ' Create arrays

        Dim varArray2 As Object() = {oselect1, oselect2, oselect3, oselect4, oselect5, oselect6}

        Dim varArray3 As Object() = {pDisp1}

        Dim varArray4 As Object() = {pDisp2}

 

        ' Add bonded contact set

        ContactMgr = Study.ContactManager

        If errCode <> 0 Then ErrorMsg(swApp, "No CWContactManager object")

        CWContactSet = ContactMgr.CreateContactSet2(swsContactType_e.swsContactTypeBonded, 0, (varArray3), (varArray4), errCode)

        If errCode <> 0 Then ErrorMsg(swApp, "No CWContactSet object")

        Debug.Print(CWContactSet.ContactName & " is suppressed? (1=yes, 0=no) " & CWContactSet.State)


        ' If contact set is suppressed, unsuppress it

        If CWContactSet.State = 1 Then

            errCode = ContactMgr.SuppressUnsuppressContactPair(CWContactSet.ContactName, 0)

        End If
 

        ' Apply material to shell

        ShellMgr = Study.ShellManager

        If ShellMgr Is Nothing Then ErrorMsg(swApp, "No CWShellManager object")

        Shell = ShellMgr.GetShellAt(0, errCode)

        bApp = Shell.SetLibraryMaterial("c:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks materials.sldmat", "Ductile Iron")

        If bApp = False Then ErrorMsg(swApp, "No material applied")

 

        ' Define shell properties

        Shell.ShellBeginEdit()

        Shell.Formulation = 0

        Shell.ShellUnit = 0

        Shell.ShellThickness = 5.0#

        errCode = Shell.ShellEndEdit

        If errCode <> 0 Then ErrorMsg(swApp, "Shell not created")

 

        ' Apply material to solid

        SolidMgr = Study.SolidManager

        If SolidMgr Is Nothing Then ErrorMsg(swApp, "No CWSolidManager object")

        SolidComponent = SolidMgr.GetComponentAt(1, errCode)

        If errCode <> 0 Then ErrorMsg(swApp, "No solid component")

        SolidBody = SolidComponent.GetSolidBodyAt(0, errCode)

        If errCode <> 0 Then ErrorMsg(swApp, "No solid body")

        bApp = SolidBody.SetLibraryMaterial2("c:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks materials.sldmat", "Ductile Iron")

        If bApp = False Then ErrorMsg(swApp, "No material applied")

 

        ' Add fixed restraint

        LBCMgr = Study.LoadsAndRestraintsManager

        CWRes1 = LBCMgr.AddRestraint(swsRestraintType_e.swsRestraintTypeFixed, (varArray2), Nothing, errCode)

        If errCode <> 0 Then ErrorMsg(swApp, "No fixed restraint created")

 

        ' Set meshing

        CwMesh = Study.Mesh

        If CwMesh Is Nothing Then ErrorMsg(swApp, "No CWMesh object")

        CwMesh.Quality = 1

        Call CwMesh.GetDefaultElementSizeAndTolerance(swsLinearUnit_e.swsLinearUnitMillimeters, el, tl)

        errCode = Study.CreateMesh(swsLinearUnit_e.swsLinearUnitMillimeters, el, tl)

        If errCode <> 0 Then ErrorMsg(swApp, "Mesh failed")

 

        ' Run analysis

        errCode = Study.RunAnalysis

        If errCode <> 0 Then ErrorMsg(swApp, "Analysis failed with error code as defined in swsRunAnalysisError_e: " & errCode)

 

        ' Get results

        CWResult = Study.Results

        If CWResult Is Nothing Then ErrorMsg(swApp, "No CWResults object")

        Freq = CWResult.GetResonantFrequencies(errCode)

        If errCode <> 0 Then ErrorMsg(swApp, "No frequency result")

        Debug.Print("Resonant frequencies:)

        For i = 0 To UBound(Freq)

            Debug.Print (Freq(i))

        Next i

   

    End Sub

 

    Private Sub ErrorMsg(ByVal SwApp As Object, ByVal Message As String)

        swApp.SendMsgToUser2(Message, 0, 0)

        swApp.RecordLine("'*** WARNING - General")

        swApp.RecordLine("'*** " & Message)

        swApp.RecordLine("")

       

    End Sub

 

    Private Sub StringtoArray(ByVal inputSTR As String, ByRef varEntity As Object)

        Dim PID() As Byte

        Dim i As Integer

        varEntity = Split(inputSTR, ",")

        ReDim PID(UBound(varEntity))

        For i = 0 To (UBound(varEntity) - 1)

            PID(i) = varEntity(i)

        Next i

        varEntity = PID

    End Sub

 

    ''' <summary>

    ''' The SldWorks swApp variable is pre-assigned for you.

    ''' </summary>

    Public swApp As SldWorks

End Class

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Create Frequency Study with Mixed Mesh Example (VB.NET)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2024 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.20