Simultaneously Edit Multiple Component Contacts Example (VBA)
This example shows how to add multiple component contacts to a frequency study and
simultaneously edit them.
NOTE: To get persistent reference
identifiers (PIDs) for model selections, you can use
pidcollector.exe
or IModelDocExtension::GetPersistReference3.
'----------------------------------------------------------------------------
' Preconditions:
' 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click
' Tools > Add-ins > SOLIDWORKS Simulation > OK).
' 2. Add the SOLIDWORKS Simulation type library as a reference (in the
IDE,
' click Tools > References > SOLIDWORKS Simulation
version type library).
' 3. Ensure that the specified material library exists.
' 4. Ensure that the specified model document exists.
' 5. Open the Immediate window.
'
' Postconditions:
' 1. Opens the model.
' 2. Creates Frequency 1 study.
' 3. Uses a soft spring to stabilize the model.
' 4. Adds Component Contact-1 and Component Contact-2 to the
' Component Contacts folder in the Simulation study
tree.
' 5. Edits simultaneously both component contacts.
' 6. Applies ductile iron to the model.
' 7. Meshes the model.
' 8. Analyzes Frequency 1.
' 9. Prints the resonant frequencies of each mode to the Immediate window.
' 10. Inspect the Immediate window, the Simulation study tree, and the
' graphics area.
'
' NOTE: Because the model is used elsewhere, do not save changes.
'----------------------------------------------------------------------------
Option Explicit
Sub main()
Dim SwApp As SldWorks.SldWorks
Dim COSMOSWORKS As Object
Dim COSMOSObject As CosmosWorksLib.CwAddincallback
Dim ActDoc As CosmosWorksLib.CWModelDoc
Dim StudyMngr As CosmosWorksLib.CWStudyManager
Dim Study As CosmosWorksLib.CWStudy
Dim SolidMgr As CosmosWorksLib.CWSolidManager
Dim SolidComponent As CosmosWorksLib.CWSolidComponent
Dim SolidBody As CosmosWorksLib.CWSolidBody
Dim CwMesh As CosmosWorksLib.CwMesh
Dim CWResult As CosmosWorksLib.CWResults
Dim Part As SldWorks.ModelDoc2
Dim ContactMgr As CosmosWorksLib.CWContactManager
Dim CWComponentContact As CosmosWorksLib.CWContactComponent
Dim pDisp3 As Object, pDisp4 As Object
Dim var20 As Variant, var21 As Variant
Dim Freq As Variant
Dim bApp As Boolean
Dim str3 As String, str4 As String
Dim longstatus As Long, longwarnings As Long
Dim errCode As Long
Dim el As Double, tl As Double
Dim i As Long
Set SwApp = Application.SldWorks
SwApp.OpenDoc6 "C:\Users\Public\Documents\SOLIDWORKS\SOLIDWORKS
2019\samples\Simulation Examples\Contact\quartereyebar.sldasm", swDocASSEMBLY,
swOpenDocOptions_Silent, "", longstatus, longwarnings
Set Part = SwApp.ActiveDoc()
Set COSMOSObject = SwApp.GetAddInObject("SldWorks.Simulation")
If COSMOSObject Is Nothing Then ErrorMsg SwApp, "Failed to get
Simulation add-in"
Set COSMOSWORKS = COSMOSObject.COSMOSWORKS
If COSMOSWORKS Is Nothing Then ErrorMsg SwApp, "Failed to get
COSMOSWORKS"
Set ActDoc = COSMOSWORKS.ActiveDoc()
If ActDoc Is Nothing Then ErrorMsg SwApp, "Failed to get active
document"
' Create new frequency study
Set StudyMngr = ActDoc.StudyManager()
If StudyMngr Is Nothing Then ErrorMsg SwApp, "Failed to get study
manager"
Set Study = StudyMngr.CreateNewStudy3("Frequency
1", swsAnalysisStudyTypeFrequency, 0, errCode)
If Study Is Nothing Then ErrorMsg SwApp, "Failed to create
frequency study"
Dim StudyOptions As ICWFrequencyStudyOptions
Set StudyOptions = Study.FrequencyStudyOptions
StudyOptions.UseSoftSpring = 1
str3 =
"64,31,0,0,4,0,0,0,255,254,255,29,81,0,117,0,97,0,114,0,116,0,101,0,114,0,69,0,121,0,101,0,66,0,97,0,114,0,45,0,49,0,64,0,113,0,117,0,97,0,114,0,116,0,101,0,114,0,101,0,121,0,101,0,98,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,9,0,0,0,3,0,0,0,103,0,0,0,102,0,0,0,101,0,0,0"
StringtoArray str3, var20
Set pDisp3 = Part.Extension.GetObjectByPersistReference3((var20),
longstatus)
str4 =
"64,31,0,0,5,0,0,0,255,254,255,27,81,0,117,0,97,0,114,0,116,0,101,0,114,0,66,0,111,0,108,0,116,0,45,0,49,0,64,0,113,0,117,0,97,0,114,0,116,0,101,0,114,0,101,0,121,0,101,0,98,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,11,0,0,0"
StringtoArray str4, var21
Set pDisp4 = Part.Extension.GetObjectByPersistReference3((var21),
longstatus)
Set ContactMgr = Study.ContactManager
If errCode <> 0 Then ErrorMsg SwApp, "Failed to get contact
manager"
ContactMgr.DeleteContactComponent
("Global Contact")
' Add bonded component contacts
Set CWComponentContact = ContactMgr.CreateContactComponent(swsContactTypeBonded,
swsMeshCompatibilityCompatible, pDisp3, errCode)
Set CWComponentContact = ContactMgr.CreateContactComponent(swsContactTypeBonded,
swsMeshCompatibilityCompatible, pDisp4, errCode)
' Simultaneously edit both component contacts
Dim multCCEM As CWMultipleComponentContactsEditManager
Set multCCEM = Study.MultipleComponentContactsEditManager
errCode = multCCEM.AddContactComponent("Component
Contact-1")
errCode = multCCEM.AddContactComponent("Component
Contact-2")
Debug.Print "Number of contact components to edit simultaneously: "
& multCCEM.GetContactComponentsCount
multCCEM.MultipleComponentContactsBeginEdit
Debug.Print " Setting default component contact to Component
Contact-1"
errCode = multCCEM.SetAsDefaultComponentContact("Component
Contact-1")
Debug.Print " Setting contact type to Allow Penetration"
Debug.Print ""
errCode = multCCEM.SetContactType(swsContactTypeFreeOrInsulated)
multCCEM.MultipleComponentContactsEndEdit
' Apply material to model
Set SolidMgr = Study.SolidManager
If SolidMgr Is Nothing Then ErrorMsg SwApp, "SolidMgr object not
there"
Set SolidComponent = SolidMgr.GetComponentAt(0,
errCode)
If errCode <> 0 Then ErrorMsg SwApp, "No solid component"
Set SolidBody = SolidComponent.GetSolidBodyAt(0,
errCode)
If errCode <> 0 Then ErrorMsg SwApp, "No solid body"
bApp = SolidBody.SetLibraryMaterial("c:\Program
Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks
materials.sldmat", "Ductile Iron")
If bApp = False Then ErrorMsg SwApp, "No material applied"
Set SolidComponent = SolidMgr.GetComponentAt(1,
errCode)
If errCode <> 0 Then ErrorMsg SwApp, "No solid component"
Set SolidBody = SolidComponent.GetSolidBodyAt(0,
errCode)
If errCode <> 0 Then ErrorMsg SwApp, "No solid body"
bApp = SolidBody.SetLibraryMaterial("c:\Program
Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks
materials.sldmat", "Ductile Iron")
If bApp = False Then ErrorMsg SwApp, "No material applied"
' Mesh model
Set CwMesh = Study.Mesh
If CwMesh Is Nothing Then ErrorMsg SwApp, "Failed to get mesh
object"
CwMesh.Quality = 1
Call CwMesh.GetDefaultElementSizeAndTolerance(swsLinearUnitMillimeters,
el, tl)
errCode = Study.CreateMesh(swsLinearUnitMillimeters,
el, tl)
If errCode <> 0 Then ErrorMsg SwApp, "Failed to create mesh"
' Run analysis
errCode = Study.RunAnalysis
If errCode <> 0 Then ErrorMsg SwApp, "Analysis failed"
' Get resonant frequencies for each mode
Set CWResult = Study.Results
If CWResult Is Nothing Then ErrorMsg SwApp, "Failed to get results
object"
Freq = CWResult.GetResonantFrequencies(errCode)
If errCode <> 0 Then ErrorMsg SwApp, "Failed to get resonant
frequencies"
Debug.Print "Resonant frequencies (mode number,
radians/second, cycles/second, period in seconds):"
For i = 0 To UBound(Freq)
Debug.Print " " & Freq(i)
Next i
End Sub
Sub ErrorMsg(SwApp As SldWorks.SldWorks, Message As String)
SwApp.SendMsgToUser2 Message, 0, 0
SwApp.RecordLine "'*** WARNING - General"
SwApp.RecordLine "'*** " & Message
SwApp.RecordLine ""
End Sub
Sub StringtoArray(inputSTR As String, varEntity As Variant)
Dim PID() As Byte
Dim i As Integer
varEntity = Split(inputSTR, ",")
ReDim PID(UBound(varEntity))
For i = 0 To (UBound(varEntity) - 1)
PID(i) = varEntity(i)
Next i
varEntity = PID
End Sub