Hide Table of Contents

Simultaneously Edit Multiple Contact Sets Example (VB.NET)

This example shows how to add multiple contact sets to a frequency study and simultaneously edit them.

NOTE: To get persistent reference identifiers (PIDs) for model selections, you can use pidcollector.exe or IModelDocExtension::GetPersistReference3.

'----------------------------------------------------------------------------
' Preconditions:
' 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click 
'    Tools > Add-ins > SOLIDWORKS Simulation > OK).

' 2. Add the SOLIDWORKS Simulation primary interop assembly as a reference
'    (in the IDE, click Project > Add Reference > .NET > 
'    SolidWorks.Interop.cosworks > OK).

' 3. Ensure that the specified model document exists.
' 4. Open the Immediate window.
'
' Postconditions:
' 1. Opens the model.
' 2. Gets the Ready study.
' 3. Adds two contact sets.
' 4. Simultaneously edits the contact sets to change types
'    from Bonded to Allow Penetration.
' 5. Creates a mesh.
' 6. Runs an analysis.
' 7. Inspect the Immediate window and the Simulation Study tree.
'
' NOTE: Because the model is used elsewhere, do not save changes.
'---------------------------------------------------------------------------
 
Imports SolidWorks.Interop.sldworks
Imports SolidWorks.Interop.swconst
Imports SolidWorks.Interop.cosworks
Imports System
Imports System.Diagnostics
 
Partial Class SolidWorksMacro
 
    Public Sub main()
 
        Dim COSMOSWORKS As CosmosWorks
        Dim COSMOSObject As CwAddincallback
        Dim ActDoc As CWModelDoc
        Dim StudyMngr As CWStudyManager
        Dim Study As CWStudy
        Dim CwMesh As CWMesh
        Dim CWResult As CWResults
        Dim Part As ModelDoc2
        Dim ContactMgr As CWContactManager
        Dim CWContactSet As CWContactSet
        Dim pDisp1 As Object, pDisp2 As Object, pDisp3 As Object
        Dim var8 As Object = Nothing
        Dim var9 As Object = Nothing
        Dim var10 As Object = Nothing
        Dim Freq As Object
        Dim str1 As String, str2 As String, str3 As String
        Dim longstatus As Integer, longwarnings As Integer
        Dim errCode As Integer
        Dim el As Double, tl As Double
        Dim i As Integer
 
 
        swApp.OpenDoc6("C:\Users\Public\Documents\SOLIDWORKS\SOLIDWORKS 2019\samples\Simulation Examples\shaft.sldasm", swDocumentTypes_e.swDocASSEMBLY, swOpenDocOptions_e.swOpenDocOptions_Silent, "", longstatus, longwarnings)
        Part = swApp.ActiveDoc()
 
        COSMOSObject = swApp.GetAddInObject("SldWorks.Simulation")
        If COSMOSObject Is Nothing Then ErrorMsg(swApp, "COSMOSObject object not found")
 
        COSMOSWORKS = COSMOSObject.COSMOSWORKS
        If COSMOSWORKS Is Nothing Then ErrorMsg(swApp, "COSMOSWORKS object not found")
 
        ActDoc = COSMOSWORKS.ActiveDoc()
        If ActDoc Is Nothing Then ErrorMsg(swApp, "No active document")
 
        ' Gets the Ready study
        StudyMngr = ActDoc.StudyManager()
        If StudyMngr Is Nothing Then ErrorMsg(swApp, "No CWStudyManager object")
 
        Study = StudyMngr.GetStudy(0)
        If Study Is Nothing Then ErrorMsg(swApp, "No study found")
 
        ' Get selections for multiple contact sets
        ' Shaft source
        str1 = "189,35,0,0,3,0,0,0,255,254,255,23,111,0,118,0,101,0,114,0,101,0,110,0,100,0,101,0,114,0,32,0,115,0,104,0,97,0,102,0,116,0,45,0,49,0,64,0,115,0,104,0,97,0,102,0,116,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,13,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,58,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,111,0,118,0,101,0,114,0,101,0,110,0,100,0,101,0,114,0,32,0,115,0,104,0,97,0,102,0,116,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,"
        str1 = str1 & "9,128,255,254,255,15,111,0,118,0,101,0,114,0,101,0,110,0,100,0,101,0,114,0,32,0,115,0,104,0,97,0,102,0,116,0,2,0,0,5,73,58,52,255,254,255,0,0,123,22,28,65,1,0,0,0,0,0,0,0,35,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,45,0,0,0,0,0,0,0,123,22,28,65,10,0,0,0,65,73,58,52,1,0,0,0,255,255,1,0,19,0,109,111,70,105,108,108,101,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,13,0,0,0,97,73,58,52,1,0,0,0,0,0,12,128,0,0,5,128,8,0,14,0,0,0,108,73,58,52,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
        str1 = str1 & ",Type=1"
        StringtoArray(str1, var8)
        pDisp1 = Part.Extension.GetObjectByPersistReference3((var8), longstatus)
 
        ' Bore 1 target
        str2 = "189,35,0,0,3,0,0,0,255,254,255,28,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,45,0,50,0,64,0,115,0,104,0,97,0,102,0,116,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,21,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,63,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,46,0,8"
        str2 = str2 & "3,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,20,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,2,0,0,130,66,58,52,255,254,255,0,0,144,22,28,65,1,0,0,0,0,0,0,0,34,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,52,0,0,0,0,0,0,0,144,22,28,65,15,0,0,0,58,68,58,52,1,0,0,0,255,255,255,255,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,15,0,0,0,58,68,58,52,1,0,0,0,0,0,12,128,0,0,5,128,8,0,19,0,0,0,141,68,58,52,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
        str2 = str2 & ",Type=1"
        StringtoArray(str2, var9)
        pDisp2 = Part.Extension.GetObjectByPersistReference3((var9), longstatus)
 
        ' Bore 2 target
        str3 = "189,35,0,0,3,0,0,0,255,254,255,28,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,45,0,49,0,64,0,115,0,104,0,97,0,102,0,116,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,20,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,20,0,109,111,69,110,100,70,97,99,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,63,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,46,0,8"
        str3 = str3 & "3,0,76,0,68,0,80,0,82,0,84,0,9,128,255,254,255,20,112,0,98,0,32,0,98,0,101,0,97,0,114,0,105,0,110,0,103,0,95,0,49,0,46,0,53,0,48,0,32,0,98,0,111,0,114,0,101,0,2,0,0,130,66,58,52,255,254,255,0,0,144,22,28,65,1,0,0,0,0,0,0,0,34,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,52,0,0,0,0,0,0,0,144,22,28,65,15,0,0,0,58,68,58,52,1,0,0,0,255,255,255,255,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,15,0,0,0,58,68,58,52,1,0,0,0,0,0,12,128,0,0,5,128,8,0,19,0,0,0,141,68,58,52,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
        str3 = str3 & ",Type=1"
        StringtoArray(str3, var10)
        pDisp3 = Part.Extension.GetObjectByPersistReference3((var10), longstatus)
 
        ' Create arrays
        Dim varArray3 As Object() = {pDisp1}
        Dim varArray4 As Object() = {pDisp2}
        Dim varArray5 As Object() = {pDisp3}
 
        ' Add bonded contact sets
        ContactMgr = Study.ContactManager
        If errCode <> 0 Then ErrorMsg(swApp, "No ContactManager object")
        CWContactSet = ContactMgr.CreateContactSet2(swsContactType_e.swsContactTypeBonded, 0, (varArray3), (varArray4), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "No CWContactSet object")
 
        CWContactSet = ContactMgr.CreateContactSet2(swsContactType_e.swsContactTypeBonded, 0, (varArray3), (varArray5), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "No CWContactSet object")
 
        ' Simultaneously edit both contact sets
        Dim multCSEM As CWMultipleContactSetsEditManager
        multCSEM = Study.MultipleContactSetsEditManager
 
        errCode = multCSEM.AddContactSet("Contact Set-1")
        errCode = multCSEM.AddContactSet("Contact Set-2")
        Debug.Print("Number of contact sets added: " & multCSEM.GetContactSetCount)
        multCSEM.MultipleContactSetsBeginEdit()
        errCode = multCSEM.SetAsDefaultContactSet("Contact Set-1")
        errCode = multCSEM.SetContactType(swsContactType_e.swsContactTypeFreeOrInsulated)
        multCSEM.MultipleContactSetsEndEdit()
 
        ' Mesh
        CwMesh = Study.Mesh
        If CwMesh Is Nothing Then ErrorMsg(swApp, "No CWMesh object")
 
        CwMesh.Quality = 1
        Call CwMesh.GetDefaultElementSizeAndTolerance(swsLinearUnit_e.swsLinearUnitMillimeters, el, tl)
 
        errCode = Study.CreateMesh(swsLinearUnit_e.swsLinearUnitMillimeters, el, tl)
        If errCode <> 0 Then ErrorMsg(swApp, "Mesh failed")
 
        ' Run analysis
        errCode = Study.RunAnalysis
        If errCode <> 0 Then ErrorMsg(swApp, "Analysis failed with error code as defined in swsRunAnalysisError_e: " & errCode)
 
        ' Get results
        CWResult = Study.Results
        If CWResult Is Nothing Then ErrorMsg(swApp, "No CWResults object")
 
        Freq = CWResult.GetResonantFrequencies(errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "No frequency result")
 
        Debug.Print("Resonant frequencies:")
 
        For i = 0 To UBound(Freq)
            Debug.Print(Freq(i))
        Next i
 
    End Sub
 
 
    Private Sub ErrorMsg(ByVal SwApp As ObjectByVal Message As String)
 
        swApp.SendMsgToUser2(Message, 0, 0)
        swApp.RecordLine("'*** WARNING - General")
        swApp.RecordLine("'*** " & Message)
        swApp.RecordLine("")
 
 
    End Sub
 
 
    Private Sub StringtoArray(ByVal inputSTR As StringByRef varEntity As Object)
 
        Dim PID() As Byte
        Dim i As Integer
 
        varEntity = Split(inputSTR, ",")
        ReDim PID(UBound(varEntity))
 
        For i = 0 To (UBound(varEntity) - 1)
            PID(i) = varEntity(i)
        Next i
 
        varEntity = PID
 
    End Sub
 
 
    ''' <summary>
    ''' The SldWorks swApp variable is pre-assigned for you.
    ''' </summary>
 
    Public swApp As SldWorks
 
End Class

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Simultaneously Edit Multiple Contact Sets Example (VB.NET)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2024 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.