Each drawing type has an associated title block that you can specify in
drawing properties. You can use the title block selector to change the title block that is
associated with particular drawings.
To access the Title block, right-click a
book, folder, or drawing, and click
.
If you want to apply a title block to all electrical project
drawings or to a particular drawing type (such as schematic or terminal strip
drawings), it is best to apply the new title block at the electrical project
configuration level. After you change the parameters for one drawing, you are asked
if you want to apply the new title block to all drawings of the same type. For more
information, see
Title Blocks.
Commands
| Command Name |
Description |
Properties
 |
Opens the Properties dialog box for the selected title block.
For more information, see Properties. |
Preview
 |
Opens the title block in a preview dialog box. You cannot
modify the block in this view. |
List mode
 |
Displays a list of title blocks. |
Thumbnail mode
 |
Displays title blocks as thumbnail previews. |
Configuration
 |
Manages the display settings for items in the dialog
box. |
Classification
This tab displays the title blocks classification in tree form. The left part of the
dialog shows the title block classifications. The right side shows the title blocks
in the selected classification. If you select Display sub-class
content, the right side shows all the title blocks in the sub-class
of the selected classification.
Filters
This tab lets you filter the title blocks list. All filter criteria are taken from
the title block properties. The right part of the dialog box displays the title
blocks that correspond to the selected criteria.
Remove filter removes all filter criteria.