The Collaborative Server is a Windows Service that must be running at all
times, and have constant, uninterrupted, bidirectional communication with clients
through firewalls and virus scanners.
To configure the Collaborative Server in individual or server mode,
specify the following parameters:
- The machine name (for example LOCALHOST or MyMachine),
or its IP address (for example 127.0.0.1,
or 192.168.999.999).
- The port number (by default 26666).
You can configure the Collaborative Server during the installation or
later in the command.
To provide uninterrupted bidirectional communication, make sure that port
numbers
26666 to 26676 (when
10 users are connected simultaneously)
are
available on the system where the Collaborative Server is installed. If not, ask the
system administrator to find another port for SOLIDWORKS Electrical.