Electrical Attributes PropertyManager

The Electrical Attributes PropertyManager appears when, while editing a cable route, you query the electrical attributes of the selected route segment.

To access the PropertyManager, in the flattened route, right-click a route and select Electrical Attributes.

Select Route Segment / List All Wires

  • Select Route Segment
    In the graphics area, click a segment of the route to display its electrical attributesDisplays the length and the diameter of the selected segment. The software calculates the diameter with this formula:

    D=2*sqrt(A*F/PI)

    D=Diameter

    sqrt=Square root

    A=Area (Sum of the cross-section area of each wire - Area of a circle = PI*r²)

    F=Correction factor depending on the number of wires

    Table 1. Correction factor
    Number of wires 3 4 5 6-7 8-10 >10
    Factor (F) 1.55 1.45 1.4 1.35 1.3 1.28

    PI=3.14

    When a cable is in the selected segment, the calculation considers the diameter of the cable and not the diameter of the individual cable cores.

    Wire List. Displays the list of wires or cable cores passing through the selected segment.

  • List All Wires. Displays all the wires or cable cores.

    Show Cross Section. Opens a dialog box displaying the cross-section of the selected segment.

Wire List

Lists the name of each wire or cable core or those that pass through the selected segment. The cut length of each wire appears in brackets after the wire name.

You can filter the wire list using the search bar. As you type, SOLIDWORKS Routing narrows the list to match your search based on property values. The search functionality supports partial matches and is not case-sensitive.

Properties and Additional Properties

Lists the property names and values for the selected item in Wire List.