| IF a material is
chosen, THEN add a cost |
Sets a predefined cost for the
chosen material. |
| IF a material is
chosen, THEN add a cost as % of calculated
cost |
Sets a cost as a percentage of the
total, material, or manufacturing cost for the selected
material. |
| IF a material is
chosen, THEN add a markup/discount to the total/material
cost |
Sets a markup/discount as a
percentage of the total or material cost for the selected
material. |
| IF a material is
chosen, THEN add a custom operation |
Sets a custom operation for the
selected material. |
| IF model weight is a
certain size, THEN add a cost |
Sets a cost if the model weight is
between two predefined weight values. |
| IF model weight is a
certain size, THEN add a cost as % of calculated
cost |
Sets a cost as a percentage of the
total, material, or manufacturing cost, if the model weight is
between two predefined weight values. |
| IF model weight is a
certain size, THEN add a markup/discount to the
total/material/manufacturing cost |
Sets a markup/discount as a
percentage of the total or material cost, if the model weight is
between two predefined weight values. |
| IF the longest edge of
the stock bounding box is a certain size, THEN add a custom
operation |
Sets a custom operation if the
longest edge of the stock machining bounding box (X, Y, or Z axis)
is between two predefined length values. |
| IF the longest edge of
the stock bounding box is a certain size, THEN add a
cost |
Sets a cost if the longest edge of
the stock bounding box (X, Y, or Z axis) is between two predefined
length values. |
| IF the longest edge of
the stock bounding box is a certain size, THEN add a cost as %
of calculated cost |
Sets a cost as a percentage of the
total, material, or manufacturing cost, if the longest edge of the
stock bounding box (X, Y, or Z axis) is between two predefined
length values. |
| IF the longest edge of
the stock bounding box is a certain size, THEN add a
markup/discount to the total/material cost |
Sets a markup/discount as a
percentage of the selected total or material cost, if the longest
edge of the stock bounding box (X, Y, or Z axis) is between two
predefined length values. |
| IF a part weight is
between X and Y Weight, THEN add a custom
operation |
Sets a custom operation, if a part
weight is between two predefined values. |