Meshing the Model and Running the Analysis

  1. In the Simulation study tree, right-click Mesh and select Create Mesh .
  2. In the PropertyManager, under Mesh Parameters, type 1.5 (inches) for Global Size .
    This large value of the Global Size is used to show the power of the p-adaptive method.
  3. Under Advanced, select At Nodes in Jacobian points.
    It is recommended that you use At Nodes when using the p-adaptive method.
  4. Under Options, select Run (solve) the analysis.
  5. Click PM_OK.gif.
    The mesh is created and the analysis is performed.