|
Ready
|
Links the associated parameters to material properties of tubes and applied loads. By default, the material properties represent aluminum and the loading condition represents the case when the rider sits on the bicycle.
|
|
Partial
|
You need to link parameters to material properties of tubes and applied loads. You can then use these parameters as variables in the Design Evaluation Study.
|
|
DE-Ready
|
The Design Study completely defines the required scenarios, variables, and constraints. It runs the Ready study for each scenario to track the results for resultant displacement and factor of safety.
|
|
Design Evaluation
|
The Design Study defines the required scenarios completely. It defines seven of the nine required variables but no constraints. You define the remaining two variables and the two constraints. You set up the study to run the Partial study for each scenario to track the results.
|
|