Adding a Tracked Data Graph

Add a sensor to monitor the change in the 1st principal stress.

1. Right-click the Sensors folder in the FeatureManager design tree and select Add Sensor.
2. In the PropertyManager, under Sensor Type, select Simulation Data.
3. Under Data Quantity:
   1. Make sure Stress is selected in Results .
   2. Select P1: 1st Principal Stress in Component .
4. Under Properties:
   1. Select psi in Units .
   2. Select Model Max in Criterion .
5. Click .
   A new sensor appears in the Sensors folder.
6. Right-click the Trend Tracker folder in the Simulation study tree and select Add Tracked Data Graph.
7. In the PropertyManager, select Stress2 for Sensor List .
8. Click .
   A new data graph for stress appears in the Trend Tracker folder.

   You can also add sensors to track displacement, connector forces, and free body forces.