Setting Up the Drop Test Study

  1. In the Simulation study tree, right-click Setup in the Partial study and select Define/Edit.
  2. In the PropertyManager, under Specify, select Drop height.
  3. Under Height:
    1. Select From centroid.
    2. Select m from the units menu then type 3 for Drop Height from Centroid .
  4. Under Gravity:
    1. Select PLANE1 for Face, Edge, Plane for Direction.
    2. Click Reverse gravity reference so that the gravity symbol points toward PLANE1 as shown below.
  5. Under Target, select Normal to gravity.
  6. Click .