First, you change the width of the flange from the FeatureManager design tree. Then, you view the Trend Journal to see the changes in the result quantities.
-
On the FeatureManager design tree, expand the Boss-Extrude3 feature and double click Sketch4.
- In the graphics window, double click the dimension D1@Sketch4, which is of length 8.
- In the Modify dialog box, type 10mm.
- Click
and click 
.
The program regenerates the model with the current value for model dimension.
- In the Dimension PropertyManager, click . Exit the sketch.
- In the Simulation study tree, right-click the Ready
study and select Run 
.
- Repeat steps 1-6 twice but change the model dimension to 12mm and 14mm respectively.
- Right-click Trend Journal
and select Open.
Notice the quantities and values of the tracked data for the baseline and subsequent iterations.
- Scroll to the bottom of the journal to view the information about Iteration 4.
The total weight has risen to approximately 102% of the baseline value. The von Mises stress, URES displacement, and P1 1st principal stress have dropped to approximately 78%, 85%, and 81%, respectively.
- Close the document.