Inserting a Geometric Tolerance Symbol

Next, insert a geometric tolerance symbol that references the datum feature symbol.

1. Click the top edge as shown. When you preselect the edge, the geometric tolerance symbol is automatically placed.
   
2. Click Geometric Tolerance (Annotation tab).
3. Click in the graphics area to place the geometric tolerance above the drawing view.
4. In the dialog box:
   1. Select as the symbol.
   2. For Range, enter 0.5 for Tolerance, then click Add Datum.
   3. In the Datum dialog box, enter A for the primary datum.
   4. Click Done.
5. In the PropertyManager, click .
6. Move the symbol as shown.