Modifying and Dimensioning Hole Wizard Holes The holes are too large, so you resize them. On the Type tab, select M4 in Size. Click Zoom to Area (Heads-up View toolbar) and zoom in on the two holes. Select the Positions tab. Click Smart Dimension (Sketch tab). Select the center of the top hole and the origin, then click to place the dimension. In the Modify dialog box, set the value to 22, then click . Repeat steps 5 and 6 for the bottom hole. Click in the Dimension and Hole Position PropertyManagers. Single Hole Wizard hole close-up Entire model In the FeatureManager design tree, right-click CSK for M4 Flat Head Machine Screw1 and click Delete because it is not part of the model design. Click Yes to confirm the deletion. Press F to fit the model to the screen. Parent topicIntroduction to SOLIDWORKS Previous topic Creating Holes Using the Hole Wizard Next topic Adding Fillets