You can copy a sketch from one plane to another to create another profile.
-
Click Isometric
on the
Heads-up
View toolbar.

If a sketch is on the wrong plane, you can change the plane.
Right-click the sketch in the FeatureManager design tree or the graphics
area, and select
Edit Sketch Plane

. Select the new plane for
the sketch, then click
OK

in the
Sketch Plane PropertyManager.
-
Select Sketch3 (the larger circle).
-
Click Copy
on the
Standard
toolbar or
click .
- Select Plane3.
-
Click Paste
on the
Standard
toolbar or
click .