Bending a Tab

Now you specify how to bend the tab.

1. Select the top face of the tab, then click Sketched Bend (Sheet Metal tab).
2. Sketch a horizontal line of any length. Dimension it as shown.
   The bend line does not need to be the exact length of the face you are bending.

   
3. Click Exit Sketch (Sketch tab).
4. In the PropertyManager under Bend Parameters:
   1. Select the face with the sketch below the bend line for Fixed Face .
      
   2. Click Material Outside .
   3. Set Bend Angle to 90.
   4. Select Use default radius.
5. Click .
   
6. Click File > Save to This PC.