| Output
as |
Output file format supported on the target
system. Select Binary or
ASCII.
Binary files
are smaller than ASCII files, but they are not supported in some other
systems.
Select the Unit of measure.
|
| Resolution |
Controls the tessellation of nonplanar surfaces
for STL output. A lower deviation setting produces a more finely tessellated STL file.
Files generated with higher accuracy settings (increased tessellation) are larger in
size and slower to generate.
- Coarse or Fine: Preset resolution
- Custom:
- Deviation Tolerance: Controls whole-part tessellation. Lower numbers
generate files with greater whole-part accuracy.
- Angle Tolerance: Controls small-detail tessellation. Lower numbers generate
files with greater small-detail accuracy, but those files take longer to
generate.
|
| Do not translate STL
output data to positive space
|
Makes exported parts maintain their original
position in global space, relative to the origin. |
|
Save all components of an assembly in a single
file
|
(assemblies only) Saves the
assembly and its components in a single .stl
file.
|
|
Check for interferences
|
(assemblies only) Performs an
interference check on an assembly document prior to saving.
Export of an assembly with coincident or interfering bodies to a single .stl file produces a file that may be unsuitable for
some rapid prototyping systems. It is recommended that you check for interference
between the components prior to saving the assembly document.
See SOLIDWORKS Help: Interference Detection for more
information.
|
| Reset
All |
Resets the options to factory defaults. |