Two Member PropertyManager

To open the Two Member PropertyManager:

  1. In the FeatureManager design tree, expand Corner Management .
  2. Right-click Two Member Corner Group and select Edit Feature.

In the graphics area, each green handle on the model represents a corner group. When you select a blue handle, the corner group highlights in the PropertyManager.

Corners

Lists corners or groups of similar corners.

Similar Corners

Group Similar Corners lets you group similar corners and apply a corner treatment to the group. You can add or remove corners from a group.
Similar Corners is available when you select a corner from the list.

Corner Treatment

Displays the options related to Corner Treatment.

End Butt1 Trim type. Swaps the tool and body to trim.
End Butt2 Trim type. Swaps the tool and body to trim.
Trim tool available in the graphics area also lets you swap the tool and body to trim.
Planar Trim End butt trim option. Cuts the intersecting member with a plane.
Body Trim End butt trim option. Conforms the intersecting member to the shape of adjacent faces by adding or removing material.
Miter Trim Trim type. Trims the members at a 45º angle.
Open corner Trim type. Trims both members and creates an open corner.
  Trim Tool Automatic trims the target based on the selection of planar trim options. User Defined lets you select the face or plane to trim.
Full Contact planar trim Default planar trim option. Trims the member flush with adjacent faces.
First Contact planar trim Planar trim option. Trims the member when it first comes into contact with adjacent faces.
  Miter trim plane point Selects a point from the graphics area to create the miter trim through the selected point.
Gap Adds a gap between members.
  Allow Extension Extends the structural members.